My Ge front load washer model WSXH208A starts the cycle fills the drum with water and soap but will not spin on any cyle the motor hums I have some knowledge of repair with my millitary background as a quatermaster it was my job to fix these things and many other things have checked the motor with multi meter evrything seems fine have checked the board . Please help me did i miss something when checking things please help!!
Mine kept stopping mid cycle also, pouring water on the floor, then the start/pause button flashed and the door unlocked. I found the solution to clean the lint filter on the GE Adora. Go to
http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf
I just did this and my washer is now running instead of the flashing
start/pause and door unlocking. It was fairly easy. Make sure you
have towels and a flat pan to catch the water if you don't have the
machine on a riser. There may be water inside so a wet vac may be
helpful too. Once my washer finishes what was in it, I have these
funky towels to clean. You'll be very surprised what you find in the
filter! Best of luck!
830 views
Usually answered in minutes!
I have the same problem and, unfortunately, the WSXH208A washer is not the same as the Adora. I took off the front panel, and there is no white lint cover filter anywhere. Anybody know if/where there is a lint filter to clean on this model?
works fine with no clothes but when full no spin
×