Red "call in progress" light will not go off

Check and replace its tuner.
http://electronicshelponline.blogspot.com/

I think you have change its internal setting so reset your phone again so its again setup your phone and your problem has been removed like phone ring.


Nec sv8100 IPK DTerm phones Inlinecom

this is a fault in the motor controller fault. the fault code number is 140. it may have a problem with the motor windings / RPS also. you will need parts from F+P.

Youtube downloads the song in the background as you listen to it. If this process, called buffering, happens too slowly, then youtube will pause.
Make sure you aren't downloading anything in the background, otherwise you'll need to load the page, pause the video, and let it sit for a few moments before playing. Getting a faster connection can solve this problem.
If you like my solution, please vote for me.

Depends on what blinking light it is, but try feature and the button. If its the red led at the top of the phone, it is a voicemail. Could also be DND, try feature, 69, feature.

hit feature key, then dial 9 # from the operators phone

With a call in progress, press CONFERENCE, dial the internal or external number (you may have to dial 9), then press CONFERENCE again. This will join the three together.
Note: for two external calls, your extension must have the ability to access more than one outside line.

With a call in progress, press CONFERENCE, dial the internal or external number (you may have to dial 9), then press CONFERENCE again. This will join the three together.
Note: for two external calls, your extension must have the ability to access more than one outside line.

I am making the assumption that only line 1 has caller-ID. Both of my suggestions require services on the phone lines themselves, and not thru the phone system.

1. Line 1 needs features on the line to allow three-way calling. Then you would hit the Recall key after answering to send a Flash to the Central Office to dial the 2nd number. This takes the transfer away from the phone system and puts it on the CO. This requires more time and effort on the staff answering phones, and if a calls comes in while this is in progress, it's going to roll over to another number in the hunt sequence anyway.
2. Get Caller-ID on all lines.

Have you tried the answer key by itself? Usually feature and answer turns it back off.