ORLA R610 factory reset keys

Just remove the batteries and leave them out for a few days.

Or try this. By a strange coincidence the expert at 'Just Answer' has the same name as me!

Expert: Andrew Taylor replied 2 years ago.
Use the factory default password ***** gain access to the menu. Do this by pressing the "Enter" button above "Menu" inside the camera base. Pressing the "Enter" button four times sets the password ***** the default setting of "0000."
Follow the LCD screen instructions to set the time and date. Continue through the setup process until the key icon appears. This is the prompt to change the passcode.
Use the "Up" and "Down" keys to select the digits for your new passcode; the "Up" and "Down" keys are next to the Enter button. Set the first digit and press "Enter" to secure it. Repeat this process until the four-digit programming is complete.

https://www.google.com/search?q=reset+my+victure+Trail+camera+HC400+password

..

There are many genealogy sites where cemeteries and ***** records are indexed and can be searched. But the information needs to be provided by you to the site, and not by unpaid volunteers using FIXYA throughout the world (for example, I am using my computer at home in the United States of America.)

I found a facebook page for a Baptist Church there that might be of help to you, as often Churches have cemeteries and ***** records of their own parishoners.

https://www.facebook.com/pages/Luveve-Baptist-Church-Old-Luveve-Bulawayo/1704872369741701

I have searched in another country at several churches to find my wife's family records, and found many even online.

http://familysearch.org is free and you have to login to search its records, including many countries in the world.

There are many other internet sites that could be tries, many for free.

Go talk to a lawyer. Or, read the Trust document to find out how to appeal the trustee's decision.

Although it was never explained on the show or in the movie, the story of Shepherd Book's past was eventually told in a graphic novel called Serenity : The Shepheard's Tale. After running away from home and his abusive father, the young Henry Evans fell into a life of crime, and was then recruited into the Independence movement. As tensions between the Independents and the ruling Alliance increased, Evans volunteered to infiltrate the Alliance military and spy on them using a video transmitter implanted in his eye. After killing a man named Derrial Book and stealing his identiy, Evans joined a law enforcement agency, from where his ambition and drive attracted the attention of the military. When war broke out, Evans/Book attempted to orchestrate a simultaneous six-planet strike to end the war "in one day", but instead presided over a massacre of Alliance forces, including the loss of the starship IAV Alexander and the 4,000 aboard. Book was then discharged and dumped on a nearby planet via escape pod. Several years later, Book woke up in a homeless shelter after being beaten by Alliance soldiers for his role in the Alexander disaster, and had a spiritual revelation while eating a bowl of soup, which prompted him to join the church and train as a Shepherd. Ten years later, he left the church as a missionary, and took passage on the transport Serenity (as seen in the episode of the same name).

Make sure you check your belts and hoses and top off all fluid levels before undertaking any trip.

Let x be Diophantus' age when he died.

His son died 4 years before Diophantus (so Diophantus was then x-4 years old). His son lived half as long as Diophantus so when he (son) died he was x/2.
Diophantus' son was born when Diophantus was (x-4)-x/2 years old. That was 5 years after his marriage so when Diophantus married he was (x-4)-x/2-5 years old. We also know that 1/6 of his life was spent in childhood, 1/12 in youth and 1/7 as bachelor so (x-4)-x/2-5=(1/6+1/12+1/7)x.
Now you solve last equation:

• x-4-x/2-5=11/28x
• x/2-11/28x=4+5
• 3/28x=9
• x=9*28/3=84 years

Diophantus was 84 years old when he died.

I definately wouldn't toss it out yet. Most GPS' are pretty solid and last for years. Sometimes they just need an update...or a jumpstart! Here are a couple of things to try:
1) Try the following reset options. From the menu on the device, go to: Preferences --> System --> Reset --> Delete Preferences. Preferences --> System --> Reset --> Delete Favourites . Preferences --> System --> Reset --> Delete Recent Addresses. Preferences --> System --> Reset --> Factory Reset. This option restores ALL settings to factory defaults.
If that doesn't work, then perform this step: Preferences --> System --> Reset --> GPS Reset.
After you complete the steps above, then take it outside to allow it time to 'find itself' (this may take 3-5 minutes), and see if the position becomes accurate again.
Hope this helps! Cheers!

Call the dealer with the VIN. They may also need the radio pulled out for the model number but try the VIN first. Let me know.

Hello

Thank you for using FixYa for your problem

1. you need to enter factory Menu.
   
   You do so by doing the following:
   1).Start the projector.
   2).Press keypad <Source> and <Auto> keys simultaneously, enter " Lamp Hour info" layer
   3). Press <Source> and <Auto> keys simultaneously again, then enter factor menu.
   Do not change anything till you reach Lamp Layer where lamp hour and usage hour is given. If you reset, then all data revert to default - factory reset. you may chage here or under (2).
   Let me know if this solves your problem.
2. - Press exit for 3 seconds
   - The Menu to reset the Hours rises up
   - Folow the manual on your screen

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand