Just fitted new power supply after repair but power supply working but it wont power up .....please help

You must have the radio repaired to enter the code, there is no way around the problem of the inoperable button. Next time use a battery back up, never completely power down the system. Walmart has these battery power supplies.

if you are experiencing quick flashing light on the display. then you will be needing to aquire a new power supply in particular 2xIRF450BPF components have failed on the power supply PWB located in the upper right quadrant. Belmonte Business Equipment have the Power supply in stock and can be sent or fitted.

open the harness you damaged and repair the wires, then see how it acts

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Good Evening

The red button is not something available as a spare part that can be sent out for customers to replace themselves due to the safety implications of it being incorrectly fitted; to replace this button the carseat needs a new harness, which must be fitted by our engineers. If your carseat is under 2 years old this is still covered by the warranty, please return the carseat to your retailer with your proof of purchase and they will make arrangements for it to be sent to our engineers for full inspection and any repair work required (in this instance, a replacement harness will be fitted). After full safety checks the carseat will be sent back. Alternatively if the carseat is over 2 years old or you do not have your proof of purchase please contact our customer service department on 01284 413141 (Mon - Fri, 8:30 am to 4:30 pm) and the standard charge for repair is £50 which includes courier delivery of the carseat back to your address; in addition to this you would need to make arrangements and cover costs for the carseat to be sent to the engineers. Hope this helps! Thanks :)

The internal power supply needs professional attention. It should may be an inexpesive repair if you find a good service technician.

Please DO NOT bypass the fuse. That may cause an electrical fire.

Good Luck

i dont reccomend opening the system yourself, as your warrenty will b voided. it looks like it is having a problem getting the 'power up' command to the power supply. your system will most likely have 2 be sent back to microsoft 2 either b fixed, or a new 1

If the old one works you have another power supply or wrong one.
Check the properties of your power supply.

Related to your issue you also may consider this:


1.- Computer AC / DC cable is bad not allowing the computer battery to charge.
2.- Battery is bad.
3.- Battery charger board is bad.

Solutions:
1.- Computer AC / DC cable is bad not allowing the computer battery to charge
Verify that the AC and or DC cable is not bad by testing the computer only with the power plug connected and the battery out of the laptop.
2.- Battery is bad
It is possible that if the power plug is good that the computer battery is bad. Leave the computer connected to the power with the battery connected in the computer for at least one hour; if the battery does not charge, consider having the battery and/or the laptop serviced or repaired.
If the computer and/or battery is not in warranty consider just replacing the battery as it is very likely that it is just a bad battery.
3.- Battery charger board is bad
If the battery has been replaced or an alternate battery from an alternate identical laptop does not work in the computer, it is likely that the power or charger board within the laptop is bad. It is recommended that the laptop be serviced or repaired.

****************************************
Please don't forget to rate my help!
Thank you for using FIXYA!
Have a great day!
Pablo :-)

I have v30dmtt 29 inch tatung and had the same problem. I took the power supply out and took it to repair man. He told me it couldnt be fixed. I contacted the manufacturer and had a new one sent. The phone # is 915-771-7554 but you need to call 1-888-482-8864 to get a case #. It costs 70.00 for a new power supply unit.The part # I needed was 6693006610. I hope this helps.

GREGG, HAVE YOU TRIED TOSSING SIRIUS OUT THE DRIVER'S SIDE WINDOW AND TUNING IN A.M.? IT WORKEDS FOR ME GRUMPA