Synergy V remote - TV power on to last channel viewed - what's the code??

What is the brand name of the device, do you want set-up codes with this remote control? Provide more details, please. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

go to www. remotecodelist.com

God bless you

Hello

In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all

channels.Or, if programmed, use the FAV key to scan only your favorite
channels to view a desired channel

Press CBL/SAT or TV once.

Press FAV once.

• IfFavorite Channel Scan has been set up, scanning of

favorite channels will start with up to 100 channel changes
or until stopped by pressing any key.

IfFavorite Channel Scan has not been set up, scanning

will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.

To stop scanning channels at any time, press any key
once.

If this hasn't been resolved, I do have some steps that will help you out. The link below will walk you through a power scan, which will program the remote to the tv. At that point, you will be able to change the channels on the tv with the remote.


http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

The people answering are so retarded as too call a repair man lol They couldn't even tie their own shoes without talking to a shoe lace minimum wage person that is advertised as "professional".. Its a code, that is all that is needed here. 412 and 413 is for the 8000 model of Scientific Atlantic but I myself and and looking for the codes to the 4250 model. Its not 412 and 413 so... yeah... but these answers from people, hard to believe they went to college. What did they do hold the teachers hand all the way through and paid the full sum without being smart and thinking for themselves for once instead of someone else doing all the thinking... unreal lol Its a simple 3 number code, just keep looking on the internet, someone knows the answer and btw Time Warner Cable does not, they updated the system and I had to wait 15 minutes on hold for them to pull it up and that was 4 yrs ago.. The switch with Spectrum I highly doubt they have it anymore...

After you set the lock, you will need the secret code in order to:
• view a locked program,
• view the locked TV, or
• cancel the lock.
If you forget the code, you can view the locked TV without entering the code. To do this, simply
press the buttons on your remote labeled "QV" and "9" at the same time whenever your secret
code is requested. Unlocking theTV this way is temporary.
To change or permanently cancel the lock:
I. Turn on your TV. If the TV requests your secret code, press
and_ at the same time.
MENU
2. Press _ to view the main menu.
3. Use the • o rV to select ..V..-Ch p Parent Lock and press ENTER .
4. The on-screen display will ask for your current passcode. Press
and _ at the same time.
5. The on-screen display will now ask you to enter a new code:
MENU HOME
• To cancel the passcode permanently, press _ or _ .
• To change to a new passcode, use the number buttons to enter a
new code, then press E_R,
IMPORTANT
You must use the remote control included with this
TV. You cannot use a remote control from another
Mitsubishi component and you cannot use "Univer_
sar' remotes from other manufacturers.

Hi and welcome to FixYa,

The user manual for a Brookstone 538744 is available here. It is in pdf form and would need Adobe Acrobat Reader to view the file.

Good luck and thank you for using FixYa.

Unplug unit from AC outlet for 10 - mins then plug back in to AC. Turn unit on select channel 3 turn off and back on.

Sylvania TVs are made by Funai Corp. You should try any Funai codes that are listed for the Synergy V remote. Alternatively, you can try the code search method, point and search. See http://help.rcn.com/pf/12/webfiles/files/ONNET6907/remotes/RC-U62CDR/index.htm#Point_and_Press_Programming for the details. One Synergy V remote code list is available in this copy of the manual: http://help.rcn.com/pf/12/webfiles/files/ONNET6907/remotes/RC-U63CDR/RC-U63CDR.pdf . I found the codes for Funai to be 047 048 157 168 211 .

I hope this helps.

Cindy Wells
(For my TV, the search all codes is often better for universal remotes. The brand name codes listed didn't work; searching all codes found an exact match for all the features that I use.)

You need remote rc64 to control the Olevia 32 inch LCD. You can call Directv and order the remote. Use code 11610.