Tascam MF-P01 recorder

try here...
Tascam Manuals HiFi Engine

P01 IS NOT A FULL FAULT CODE!!CHECK IT AGAIN!!

I guess this is what you need
View Tascam 2488 PDF User Manual Online
If you have any question about your home appliances you can always check manualbirds.com for free manuals and guides.

Mine also would not play back on any of the channels but would record. The problem was on the lower board, capacitors C105, C205, C305 and C405, all are 220uF, rated at 10V - on a 9V machine! All four went leaky, which meant that the op-amps each were connected to got a bias which drove the output to 8.5V and no output.
I replaced all four capacitors with new ones rated at 25V and it works again!

that sucks bro

On page 15 trouble shoot adapter
The adapter is 12 volts DC. The connections may be dirty or the adapter defective.

Replacements are available that claim to be equivalent.

http://tascam.com/content/downloads/products/319/MFP01En.pdf



http://tascam.com/content/downloads/products/319/MFP01En.pdf

Processor Family Processor Speed System Bus Frequency Cache Size BIOS Version Notes Pentium® III processor 850 MHz 100 MHz 256 KB P14 or greater The following board revisions (AA numbers) support these processors: 754552-200 or later
754558-200 or later
A01450-200 or later.
See the board revision note, below, for an explanation.
800 MHz 100 MHz 256 KB P14 or greater 750 MHz 100 MHz 256 KB P14 or greater 700 MHz 100 MHz 256 KB P14 or greater 650 MHz 100 MHz 256 KB P14 or greater 600E MHz 100 MHz 256 KB P14 or greater 550E MHz 100 MHz 256 KB P14 or greater 600 MHz 100 MHz 512 KB P12 or greater All board revisions support these processors 550 MHz 100 MHz 512 KB P07 or greater 500 MHz 100 MHz 512 KB P07 or greater 450 MHz 100 MHz 512 KB P07 or greater Pentium® II processor 450 MHz 100 MHz 512 KB P01 or greater 400 MHz 100 MHz 512 KB P01 or greater 350 MHz 100 MHz 512 KB P01 or greater 333 MHz 66 MHz 512 KB P01 or greater 300 MHz 66 MHz 512 KB P01 or greater 266 MHz 66 MHz 512 KB P01 or greater 233 MHz 66 MHz 512 KB P01 or greater Intel® Celeron® processor 433 MHz 66 MHz 128 KB P01 or greater 400 MHz 66 MHz 128 KB P01 or greater 366 MHz 66 MHz 128 KB P01 or greater 333 MHz 66 MHz 128 KB P01 or greater 300A MHz 66 MHz 128 KB P01 or greater 300 MHz 66 MHz 0 KB P01 or greater 266 MHz 66 MHz 0 KB P01 or greateri hope that this solved your request.
Sergio

Link to Tascam 2488 documents page:
http://tascam.com/Products/2488_downloads.html

Individual Items as Listed:

Link to the Tascam 2488 product brochure:
http://tascam.com/Products/2488/2488_bro.pdf

Link to the Tascam 2488 application guide:
http://tascam.com/Products/2488/2488_AppGuide.pdf

Here's the link to the Tascam 2488 quick start guide:
http://tascam.com/Products/2488/2488_quickstart.pdf

Link to the updated Tascam 2488 manual:
http://www.tascamcontractor.com/ftp_resour...w_additions.pdf

Link to the Tascam 2488 manual additions:
http://www.tascamcontractor.com/ftp_resour...e_additions.pdf

Link to the Tascam 2488 MIDI Parameter Mapping
http://www.tascamcontractor.com/ftp_resour...ontrol_v0.2.pdf

Link to TASCAM 2488 Hi-Res images:
http://www.tascamcontractor.com/ftp_resour...488_images.html

Link to Tascam 2488 documents page:
http://tascam.com/Products/2488_downloads.html

Individual Items as Listed:

Link to the Tascam 2488 product brochure:
http://tascam.com/Products/2488/2488_bro.pdf

Link to the Tascam 2488 application guide:
http://tascam.com/Products/2488/2488_AppGuide.pdf

Here's the link to the Tascam 2488 quick start guide:
http://tascam.com/Products/2488/2488_quickstart.pdf

Link to the updated Tascam 2488 manual:
http://www.tascamcontractor.com/ftp_resour...w_additions.pdf

Link to the Tascam 2488 manual additions:
http://www.tascamcontractor.com/ftp_resour...e_additions.pdf

Link to the Tascam 2488 MIDI Parameter Mapping
http://www.tascamcontractor.com/ftp_resour...ontrol_v0.2.pdf

Link to TASCAM 2488 Hi-Res images:
http://www.tascamcontractor.com/ftp_resour...488_images.html

hi sounds like a worng channel or no output from something check the tape output's for anything if there is sound but bad or low then the tape is the problem if it's good then check that the cable connection is good (connect it to a reciver) then if all is good till the unit: check that you are listening to the right channel check that your output device is good (headphones,speakers) (connect it to a reciver) good luck