Kenmore model c970-655632 LED Display is very dim

Kenmore ELECTRIC RANGE 790.4660 User Manual

https://www.manualsdir.com > manuals > kenmore-elect...

Electric range, Estufa el?ctrica • Read online or download PDF • Kenmore ELECTRIC RANGE 790.4660 User Manual.

Kenmore Elite 790.4660 Series Manuals - ManualsLib

https://www.manualslib.com > ... > Ranges
Manuals and User Guides for Kenmore Elite 790.4660 Series. We have 1 Kenmore Elite 790.4660 Series manual available for free PDF download: Use & Care Manual ...

Kenmore ELECTRIC RANGE 790.4660 Oven User Manual ...

https://archive.org > details > Kenmore_ELECTRIC_RAN...
Kenmore ELECTRIC RANGE 790.4660 Oven User Manual. by: Kenmore. Topics: oven, display, bake, figure, cooktop, press, feature, surface, warmer, temperature, ...

LED clock/temperature light fading an - Appliance Repair Forum

forum.appliancepartspros.com/oven...ranges.../650-led-clock-temperatur...

Aug 20, 2007 - 3 posts - ‎3 authors
The LED clock/temperature/etc control light has been becoming less ... needs to be replaced (board being the oven clock/erc/control board). Control pad temperature light out
2 posts
Jun 15, 2014
Dim temp lights
2 posts
Feb 7, 2014
Frigidaire range LED display is dim
10 posts
Aug 28, 2009
Oven clock & light
1 post
Jun 21, 2009
More results from forum.appliancepartspros.com

Cheap Fix for a Dim Display on an Oven Control Panel ...

I have a Jenn-Air double wall oven with a very dim display light. Replaced c3 capacitor 68uf 35w - with a 100uf 50w cost $1.60 closes size available at Radio Shack and works good as new. Requires soldering onto the circuit board. I price a replacement part for $276.00.

Oven control board is not working # 316080102. You would need to get it repaired as it is no longer available for purchase.

I would recommend a fast, easy and affordable vendor named Partsimple.com. Partsimple has high level of expertise in control board repairing. many vendors do purchase from them then sell as if their own product.

I have also attached a direct link for reference.

http://www.partsimple.com/316080102-frg-r-12.html

Frigidaire Kenmore Tappan Range Control Board Repair Service 316080102

Hello Friends! This dimming vacuum display is either caused by a power supply failure with the control board, or a the filaments of the display themselves have started to wear-- similar to that of a bad light bulb. Either way, FixYourBoard.com can solve this problem. Contact them 512-355-1108 for more information. The photo below is from a double oven, but we repair single oven displays too.

you will need the model # to get the correct control panel for this range . the display has failed and ony repair is to replace it . part # may be on control . and inside the control area there should be a tec sheet with this info .. mm hope this helped ..

I have a kenmore gas range with digital display that will let me increase the temperature up to 35 degrees f*. It says to press BAKE for 6 sec., then use the number pad to increase or decrease then press START.
Hope this helps
Don

You need to replace the capacitors on the control board

http://fixitnow.com/wp/2009/01/28/cheap-fix-for-a-dim-display-on-an-oven-control-panel/

local part whare house can sell you a "dim clock" kit for your machine i believe it contains a new display board as well new wire harness

there is a dispay kit you can order from bosch to fix this problem. it will come with a new display board and power control which is located behind control panel as well