Hi vonniekay,
Absent any more details about your situation, this will get you started.
1. Make sure the safety cut-out switch on the lint screen in the
back is properly engaged by the plastic plug on the screen. If this is
out-of-position, nothing works (nor should it). This may fix the
problem.
2. Check the fuse; if blown again, you have a short
someplace that the fuse is protecting you from. Look for loose
connections, or damaged components. Also make sure that nothing got
left in the machine (eg. thread from cleaning rags), or any wires
didn't get properly re-connected when you cleaned it.
If this
doesn't fix it, write back with more details - - will the fan run, but
not the O3 plates, or vice versa - - I'll need more infomation at that
point.
If/when this solves the issue, please rate it accordingly.
Thanks in-advance for using Fixya.com,
Jon
101 views
Usually answered in minutes!
×