Looking for a working remote code for a Magnavox/DVD TV combo (model MWC1305). Auto search not successful.

To program your Magnavox DVD VCR combo using the Magnavox CLO358 universal remote, you can try the following codes:

0503
0675
1153
1203
1321
Here's how you can program the remote:

Turn on your Magnavox DVD VCR combo manually.
Press and hold the "Code Search" button on the remote until the indicator light turns on.
Release the "Code Search" button.
Press and release the mode button for the device you want to program (in this case, the DVD VCR combo). The indicator light should remain on.
Enter one of the codes listed above using the numeric keypad on the remote. The indicator light should turn off after entering the code.
Aim the remote at the DVD VCR combo and press the "Power" button. If the device turns off, the code is correct. If not, repeat steps 4 to 6 with the next code on the list.
If none of the codes work, or if you have any other issues, it's recommended to consult the user manual of your Magnavox CLO358 universal remote for additional instructions and a complete list of codes.

Here are some Magnavox universal remote codes you can try to use with your Proscan TV/DVD combo:

• 11963
• 11603
• 12746
• 12260
• 10587
• 12070
• 11990
• 10178
• 10030

To program the Magnavox universal remote to control your Proscan TV/DVD combo, follow these steps:

1. Turn on your TV/DVD combo and point the Magnavox universal remote at it.
2. Press and hold the "Code Search" button on the remote until the LED light on the remote turns on and stays on.
3. Press the "TV" button on the remote to program the remote to control your TV.
4. Enter one of the codes listed above using the number buttons on the remote. The LED light on the remote should turn off if the code is accepted.
5. Test the remote by pressing the "Power" button to turn on the TV/DVD combo. If it works, try other buttons on the remote to control your TV/DVD combo.
6. If the first code you entered doesn't work, repeat steps 2 to 5 with another code until you find the correct one.

If you are still having trouble programming your remote, consult the user manual or contact the manufacturer for assistance.

TV section and DVD section have individual codes to setup. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given.

For the "power-on" function, you need to press another button before pressing "power-on". Like press "enter", then press "power-on". Then you should be able to find either a Philips or a Magnavox code that works.

Hello
RCA RCR 412S remote control has no setup codes with Magnavox TV/DVD combo. Just look for any other brand remote control. OK.

Unfortunately, your remote control predates TV/DVD combos and as such the manual does not list a code for a Sylvania TV/DVD combos.

To make this control work with a TV/VCR combo, one would enter 0054 for the TV controls and 0081 for the VCR controls. May I suggest you try the following codes for the TV: 0054, 0030, 0096, 0020, 0381. If these codes do not work, try running through the auto-code search.

The manual for the URC-4330 does not list any Sylvania DVD codes at all, so I recommend running through the auto-code search. Here are the steps:

1. On the remote control, press DVD once.
2. Press and hold SET until the LED blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the the DVD and slowly alternate between pressing POWER and DVD. Stop when the DVD turns off.
5. To lock in the code, press and hold SET until the LED blinks twice, then release SET.

Hope that helps.

try this,try going to; www.fixya.com/support/t214691-remote_control_code_daenyx_tv_dvd_combo see if that will help

I have the same problem i have a magnavox tv/dvd/vcr and none of the codes work can you help me out

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?