How do I set the clock
Get into (standby mode) by hitting source (src) button until screen says "Standby".
M.Jog key is to the left of the (src) button. Hold it in for more than 1 sec to get into menu mode.
Move Toggle Control Knob (TCK) up (don't turn) until you see "Clock Adjust" on the screen.
Press Toggle Control Knob (TCK) in for more than one second and the time will appear (flashing).
Move TCK up/down for hours, left/right for minutes (again, don't turn knob).
Press (src) button when the desired time is selected.
Followed the users manual and they forgot one important piece of information--> The reference above is to press the M.Jog button to the left of the source, on my radio it is the G.Menu button. Thanks to this article I will now be on time to work. Ha HA!
great instructions bro
thx just got a mustang and the radio had a reset clock mode thingy....... now i know wat to do. is this for ALL kenwood radios
×
Thanks a lot really helpful...
SOURCE: car radio - setting the clock
1. click on S (select) and choose clock and hold it (?) 2. click on bar v|<< >>|> to select H or M or Seconds 3. adjust it turning the volume button 4. repeat steps 2 and 3 for minutes 5. repeat steps 2 and 3 for seconds
SOURCE: I have a kenwood radio model kdc-135 and can not set clock or sh
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDC-135.pdf Here's the manual link from Kenwood and it's on page 13. Hope this helps
SOURCE: setting clock on pioneer radio
you will need to turn unit off then press function button for a few seconds this will take you to the clock function.
SOURCE: Kenwood kdc-135 clock issue
does this car stereo have a hook up for my ipod and how do i get it to work
16,500 views
Usually answered in minutes!
set clock
clock adjust
×