Fatal Error: Every time my notebook loads, a blank screen appears that reads "Battery Not Recognized. System cannot charge your device". Press F1 to continue. An orange light begins to flash and switch between white and orange and when I disconnect the charging adapter, the computer switches off. This was the original battery and so I bought a new battery licensed by Dell. I connected it up but the same message came up and the lights too. I connected the adapter and switched it on and the message dissapeared as did the flashing lights. The icon says charging but it doesn't charge. even after 16 hours nothing happens.

<p>When you buy an iPod, the device comes with cables that connect the charging device to the computer. When the iPod battery is low, you can recharge by plugging into your desktop or laptop. But sometimes, when you connect your iPod to your computer, the battery charger. According to Apple's site, some problems may prevent your iPod from charging properly. <br /> <p><br /> <p>1. Connect your iPod USB charging cable only one USB port on the computer itself. External port devices, such as a USB hub, do not provide enough power to recharge your iPod. <br /> <p><br /> <p>2. Connect the iPod firewire charging only one firewire port on your computer. Like USB, Firewire ports are not enough of a load to the battery of your iPod. <br /> <p><br /> <p>3. Disconnect the computer from sleep when the computer set to sleep after a certain time. An iPod can only load on a computer that is connected and not in sleep mode. To enable sleep mode on most computers, you can move the mouse or press the power button once. Hold the power button, which usually turns off the computer. <br /> <p><br /> <p>4. Turn the iPod off and on when the unit is frozen. A frozen iPod is not charging. If the unit is still frozen when you turn it on again, restart the iPod by pressing the "Hold" switch to "On" and then back to "Off" and press and hold a "Menu" and "Select" buttons simultaneously or " Start "and" Menu "button. Hold the buttons until the Apple logo appears on the screen. <br /> <p><br /> <p>5. Set the system up-to-iPod charger so that when using a Windows 2000 computer. In preparation for the system to load the iPod device to the unit with the charging cable, launch iTunes and "iPod" in the left pane to "Settings" tab to go, check the box next to "Enable Disk use", and click the "Apply" button. Once the configuration is in place, the iPod will charge as normal. <br />

<p>The iPod Touch, a portable media player from Apple, has an internal battery that will eventually run out of power while you reload. According to Apple, the iPod touch offers up to 40 hours of audio playback or up to seven hours of video playback when fully charged. The machine takes about two hours to recharge to 80 percent capacity, and about four hours to fully charge. Although the iPod Touch does not have an innate ability to tell you how long it will take to charge the battery today, you can create a free application that will give you an approximate time to load. <br /> <p>Preparation <br /> <p><br /> <p>1. Press the "Home" button below the touch screen of your iPod Touch. <br /> <p><br /> <p>2. Touch the "App Store" icon on the home screen. <br /> <p><br /> <p>3. Tap "Search" and enter a search term such as "Battery" and then "Search". Tap the name of an application results from the battery, such as "Battery Free HD", "Magic Battery" or "sense of battery Philips Consumer Lifestyle." Tap the word "free" next to the name of the application of the battery, and tap "Install. Tap your Apple ID at the prompt to download and install the application from the battery. <br /> <p><br /> <p>Battery Free HD <br /> <p>1. Press the "Home" button of your iPod Touch. <br /> <p><br /> <p>2. Touch the "Battery Free HD" icon on the home screen app to start it. A battery icon appears with the current level, and details about the estimated time to play music, videos and surf the Internet. <br /> <p><br /> <p>3. Touch the screen with your finger and drag it upwards to scroll to the "Time to Charge" song to reveal. <br /> <p><br /> <p>Battery Magic <br /> <p>1. Press the "Home" button of your iPod Touch. <br /> <p><br /> <p>2. Touch the "Magic Battery" icon on the home screen app to start it. A battery icon appears in a window below the current time available for various activities, such as "Play Game", "3D Game" and "Wi-Fi." <br /> <p><br /> <p>3. Touch the screen with your finger and drag to scroll the window until you see "loading time" with a number of how long it takes to load your iPod Touch. <br /> <p><br /> <p>Sense of the battery, Philips Consumer Lifestyle <br /> <p>1. Press the "Home" button of your iPod Touch. <br /> <p><br /> <p>2. Touch the "sense of the battery, Philips Consumer Lifestyle app icon on home screen to start it. The battery now appears as a percentage, with a grid above options for the different activities you can do with your iPod touch as" Audio playback "," Video Playback 'and' waiting time. " <br /> <p><br /> <p>3. Tap the "Time Charge" of the network. The amount of time it takes to fully charge your iPod Touch will show up under the grill. <br />