Question about Casio Parts Cash Register PC Desktop

2 Answers

TE-2400 error E004

I have this Casio TE-2400 at first when powered on it displays this
'Init'
LLLLLLLLLL
then when i press any buttons on the panel it gives this error code
E004

Please could anybody help me clear this problem

Thanks

Posted by on

  • 1 more comment 
  • kai__viti Oct 02, 2008

    Hi,



    Sorry i have tried that but still it display Init LLLLLLLLLL

  • tomferryman May 01, 2018

    to reset the casio te2200 to factory position turn the key to program and enter 22500 then hit subtotal twice. It will hesitate a few moments and then reset. Be careful though because you will then lose any customer specific programming and need to reenter it!

  • Sam nou
    Sam nou Sep 15, 2018

    i had the same problem already fixed I follow what Mark instructor Thanks a lot Mark

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Hi.
This is very serious. It means the register is about to completely clear everything (or may have done so already). If it has been sitting for a long time without power, or new out of the box, then this is normal. We can try to jump it back out of the init mode.

Follow these steps very carefully:

Turn the power off at the wall.
Turn the key to PROGRAM mode.
Hold RECEIPT FEED button down.
Turn power on at wall.
When you see the display change to 'FFFFFFFFFF' let go of RECEIPT FEED.
Press SUBTOTAL

Turn the key back to REG mode and try it. If you get error 8, then you may need to log a clerk back on.

Let me know if you have problems.

Mark

Posted on Oct 02, 2008

  • flexion1
    flexion1 Oct 02, 2008

    It should definitely work. You have to turn the power off completely at the wall. Then make sure you turn the key to PROGRAM position.Now keep your finger on the RECEIPT FEED button - don't let go. Turn on at the wall. When the machine comes back on, it will still show the Ls on the display, then they will change to Fs. You need to keep holding RECEIPT FEED down after you turn on in PROGRAM mode. Try holding RECEIPT FEED (top left corner) longer (usually around 5 to 10 seconds). Once you see the Fs, let go of RECEIPT FEED and then press SUBTOTAL.

    if it doesn't work this time, then you have a serious lockup. We can still try a harware reset, but that is very rare, and usually only needed if you can't see the Ls on the display.


  • StephnieUK jones
    StephnieUK jones Jan 25, 2014

    thanks as that worked ..an helped me out of a "sticky"

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey i got same problem...i follow the steps but aint working. Well my problem started when a customer spill coffee so the register died completely... i let it dry 1-2 days and then i took it apart to clean it. When i had it plugged my boss pull the cable that goes from the power inside to the chip and then when we put it back we saw the INIT LLL... on the screen. Did we burn anything?

Posted on Jul 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting error in E004 for Casio TE-2200 reg how do I get out and running


Try this:
Turn key to PGM (program) mode
Turn power off at the wall socket

Hold down RECEIPT FEED button (keep your finger on it)

Turn power back on and wait 5 seconds before taking your finger off of the receipt feed button (the paper may feed out. This is normal).
The LLLLLLLLLL part of the display should change to FFFFFFFFFF.
Press SUBTOTAL once and wait for the printer to issue a receipt.
Turn key back to REG mode and try it. You may need to sign on using a clerk button or a clerk code if you use one.

Sep 22, 2015 | Retail Supplies

1 Answer

Getting error e004 on te-2200


Try this:
Turn key to PGM (program) mode
Turn power off at the wall socket

Hold down RECEIPT FEED button (keep your finger on it)

Turn power back on and wait 5 seconds before taking your finger off of the receipt feed button (the paper may feed out. This is normal).


The LLLLLLLLLL part of the display should change to FFFFFFFFFF.
Press SUBTOTAL once and wait for the printer to issue a receipt.
Turn key back to REG mode and try it. You may need to sign on using a clerk button or a clerk code if you use one.

Sep 22, 2015 | Retail Supplies

1 Answer

I have a Casio TE-2200 Electronic cash register that is saying INIT LLLLLLLLLL What do I do to fix this. Please help


Be very careful. The machine is trying to wipe all of the programming due to a flat battery (you can't store cash registers for more than a month or so). Follow this very carefully:

Turn key to PGM (program) mode
Turn power off at the wall socket

Hold down RECEIPT FEED button (keep your finger on it)

Turn power back on and wait 5 seconds before taking your finger off of the receipt feed button (the paper may feed out. This is normal).


The LLLLLLLLLL part of the display should change to FFFFFFFFFF.
Press SUBTOTAL once and wait for the printer to issue a receipt.
Turn key back to REG mode and try it. You may need to sign on using a clerk button or a clerk code if you use one.

If the memory is scrambled and your programming has vanished, you will need to clear the machine and start again. There is a full programming manual online. the only one I know of is here:
https://the-checkout-tech.com/manuals/cashregisters/Casio_TE-2200_and_TE-2400_dealers_manual.html

Jun 05, 2015 | Retail Supplies

1 Answer

Casio ce6000 error code e004


That means it is having trouble with the memory backup. Don't unplug the machine as it is about to lose all programming and sales data. Has this machine been turned off for a long period of time? When was the battery last replaced?

Jun 25, 2013 | Casio Parts Cash Register PC Desktop

1 Answer

How to use clerk secret number key on casio te 2400


I've run the cash register and then appeared on the screen error e004 ,i am repair the error , and then appeared on the screen error e008, and now I do not know what to do , also i dont know the clerk number please help me

Jun 06, 2012 | Casio Parts Cash Register PC Desktop

4 Answers

E004 Error INIT/FC


You need to finish the flag clear.
Turn key to PROGRAM mode. Turn power off at wall. Hold RECEIPT FEED down - keep your finger on it. Turn power on at wall. Wait 5 seconds, then let go of RECEIPT FEED. You should see "FFFFFFFFFF" on display. Press SUBTOTAL. Wait for print out. Turn back to REG mode (you may need to sign back on)

Feb 28, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

I have a te-2200 but cannot get past the initialization. Machine initialization procedure. I keep getting a e004 error. Its in the d11D10D9D8D3D2D1 section that i keep getting stuck in.


Ok. I need to know these things:
1. which country is it being used in? 2. Do you want a PIN number to log staff on, or just simple log on? 3. Do you have a row of buttons next to the key called CLERK or CASHIER? 4. Will you be using a bar code scanner?
----------------------------------------------------------------------
If anyone needs a Casio TE-2200, TE-2400 manual, try here: http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Jul 21, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

I have a Casio TE-4500f that I purchased from an auction it keeps giving me init _____ and then if I try to press anything it gives me error E004. Is there a way to hard reset the machine to factory...


Hi,
visit to the given link and download the manual and refer to page no. 114 for E004 meaning and solution...
www.merlinofficeequipment.co.uk/.../Casio_TE-4000_4500_User_Manual.pdf
Hope this has helped you... Please rate the answer.. Thanks..

Jul 03, 2010 | Casio Parts Cash Register PC Desktop

2 Answers

ERROR E001 & E004 PCR-T470


Hi.
You have performed the flag clear incorrectly and now the machine is trying to do an entire RAM clear. You may have already lost everything. Make sure you do not type any numbers while it is like this.

Try this:

Turn key to PROGRAM mode.
Turn power off at wall.
Hold FEED down.
Turn power on at wall.
When you see '0.00' on display, let go of RECEIPT FEED.
Press SUBTOTAL

Jan 21, 2009 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

6,683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1826 Answers

tomferryman

Level 1 Expert

43 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...