Radio comes on numbers do not show,beeps all the time

call dealer with code from on top of the radio you need to pull the radio out to see it

you would be surprised how many error code you can find by putting the word error code followed by the actual code into google

Try code 8751

BASIC INSTRUCTIONS TO ENTER A BLAUPUNKT RADIO CODE


Switch the ignition key ON

Press and hold AS button *  and the  ON button at the same time

Display Shows SAFE  then goes to 10 - - - - with a "Beep" from the speaker

Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed

If the display  now shows the correct Code number then

Press  Button AS  and hold to Enter and if successful  there should be a "Beep" from the speaker and the radio should switch on

ENTER A BLAUPUNKT CAR300 RADIO CODE


Switch the ignition key ON

Press and hold AS button *  and the  ON button at the same time

Display Shows SAFE  then goes to 10 - - - - with a "Beep" from the speaker

Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed

If the display  now shows the correct Code number then

Press  Button AS  and hold to Enter and if successful  there should be a "Beep" from the speaker and the radio should switch on

Did you try unplug the radio and plug back in kinda like doing hard start on pc.
Get the model number on the head unit and find a philips number to ring and ask them what cause this.

When you turn on the radio, it will say "codE" on the display. You have the 4-digit code number for your radio, to enter the first digit, press the "1" button on the radio the number of times until the first digit matches. For example, if your code is "2156" then, press radio preset button 1 two 2 times, then press radio preset button 2 one time, then radio preset button 3 five 5 times and finally preset button 4 six times.
THEN if the display is correct (should show 2156 in this example), press TAPE button. You should hear a beep and the radio should be working. If you make a mistake and enter a wrong code, the display will show "Err". You have 3 tries to get this correct or the radio may be toast. These are the steps for the stock radio in my 1995 GSX and they've worked for me each time I've lost battery power. Good luck!

I've had this happen twice when the battery died. It goes into the SAFE 2 mode if you try entering it and don't do it right and then you have to leave the radio on for 1 1/2 hours to have it come on to 1000 and then set it with each number one at a time and then hold down right reset until he beeps on. So, if you are discouraged as I was, the answer is to leave it on with the SAFE showing for over an hour and it probably will come on with the 1000 for setting eventually.

Try the back of your radio

I need a better model number so that I can help you. "Car 300" didn't find anything do you see a model number or name?