Question about Frigidaire Dryers
Error code E64?
On this model, as I'm sure you have noticed, the trap tends to drop quit a bit of the lint, in which the lint trap isn't to effective and the seal of the duct its attached to isn't "sealed". From my personal experience when I ran into this issue I just simply had to take the back off the machine, clean out all the lint (i even found 2 dollars in silver in there) and checked all the connections down in the base. I even went as far as removing the top and checking the connections on the control board, but considering I removed a 3 inch layer of lint from inside I honestly think that wasn't an issue. From observation I would also be sure to try and remove the lint from around rollers for the drum just for good maintenance. If all else fails get a multi meter and between these two sites you should be on your way to repairs if you really are trying to save money.
these are repair information that I found helpful. I am not associated with either company, just trying to educate.
Posted on Jun 19, 2013
The E64 error code is telling you that there is a problem with the heater You will need to take the dryer apart and check the heater circuit.
Posted on Aug 29, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 19, 2018 | Dryers
Feb 16, 2016 | Frigidaire Dryers
Feb 02, 2016 | Dryers
Good Morning friend, thank you for your post!
I see that your Frigidaire frontload washer runs for 30 seconds, then stops, and produces an error code "E64". It appears that might be an invalid error code. I would recommend performing a reset on your washer and you can do that by unplugging the power cord for at least ten minutes. If you continue to receive the error code or a new error code please reply back. I would like to assist you further. -Matt
Jun 04, 2015 | Frigidaire Washing Machines
Good Morning Yasmin Abdullah, I am happy to assist you!
Based off the information you have provided your Frigidaire dryer is displaying error code "E64". "E63" typically stands for heater open circuit, which means that it could be a faulty wiring harness or heater. I would suggest performing a reset on your dryer by disconnecting power from it for ten minutes. This could be a false error code or a miscommunication within the board and a reset will help to clear that out. I hope this information is helpful to some degree. -Matt
Dec 16, 2014 | Frigidaire Dryers
Aug 09, 2014 | Electrolux Dryers
Jul 13, 2014 | Frigidaire Affinity 5.8 Cu. Ft. Electric...
Hi gordsxbstn34 - Typically error code E64 indicates that the unit has detected that the heater circuit is open. Contact a professional to move forward accurately to check the heater coils and connections for open circuits. Depending on the diagnoses heater might need replacing and/or wiring
Jan 11, 2013 | Electrolux EIED55H Dryer
Jan 06, 2013 | Electrolux EIED55H Dryer
Mar 18, 2019 | Frigidaire Dryers
21,139 people viewed this question
Usually answered in minutes!