Gaggia Titanium stuck in energy saving mode, I cant access the menu

Ginko

• 19396 Answers
• Posted on Aug 20, 2008

SOURCE: Gaggia Titanium: stuck on 'rinse'.

Try first unplugging power cable for five minutes, see if this reset machine.

SOURCE: gaggia titanium is leaking water

Mine had the same problem. Take out the dreg drawer and brew unit. Then you will see a plastic cover roughly in the middle of the machine (behind where the brew unit was) that is held in place by two philips screws. Unscrew the screws and take out that small cover. It is probably filled with coffee grounds that prevent water from dripping out through a dripping hole. Clean out the grounds and you should be all set.
Gerwin Schalk Albany, NY

Ernest R

• 1618 Answers
• Posted on Nov 12, 2009

SOURCE: my Gaggia Titanium machine says ventilate

Run about an ounce of hot water from the wand.

SOURCE: My gaggia titanium says it's brew unit is blocked

Try cleaning and relubing the brew unit.
If that fails you require a new main board.

SOURCE: my gaggia titanium reads"decalcify" what does it mean?

To cancel the message,press and hold the water button for 5 secs, until the message is clear. The machine is due for descaling to clean the boilers.