My watch came without instructions and its set an hour fast. I checked the Armitron website and they don't have ANY info for this model #.
Armitron alarm/chrono
1.To set the time hold the mode button until the alarm flashes, then hit it one more time and the time will flash to be changed. Once the alram or time is flashing use the ST/STP button to navigate between hour, minute, month, day and day of the week, the ADJ button changes the numbers.
2.While holding down the ADJ button use the ST/STP button to turn off the hourly CHIME and the ALARM chime.
Hope this helps!! K~~
I used the instructions on the Armitron sight (www.armitron.com) for the model 45/6963 (page 2 of ladies digital). Follow their instructions but NOT their picture of the watch buttons. For the model 45/6967 the buttons are as follows:
A = lower right
B = lower left (this one is the same as on the picture)
C = upper left
D = upper right
I drew a circle and labeled the buttons according to the list above, then followed their instructions (pushing the "A" button when instructed to do so, but my "A" button is the lower right button, NOT the upper left as it appears in their picture) I was able to do all the setting/adjusting of my watch.
Hope this helps. Merry Christmas.
You have to call the 800 # and they will mail you instructions.
Yes, this works. The webpage ishttp://www.armitron.com/docs/ArmitronLad...
You'll want to print out the second page, and then label the buttons according to patbonline's instructions, This is working for me, and I just bought the watch for Christmas, 2010.
×
13,320 views
Usually answered in minutes!
Same problem. That sucks.
I have the same problem. I can't set the watch back for fall. Why don't they put the instructions online?
In fiddling around with it, I discovered that I could change the time by holding the "mode" key (lower left)....it takes you through setting the alarm first...so just hit it again to get to the regular time set. Then by using the upper right (adj) button one can adjust the numbers.
Hope that helps.
Watch came with different model instructions, that don't work for my watch (different buttons). Holding down the mode button only gets my watch to set the alarm, and never gives the opportunity to set the time.
I had the same problem. I pressed the lower left mode button and waited for the alarm start flashing. Then I pressed the adj upper right button several times and poof the time started flashing. It is not intuitive at all, but somehow it worked. Good luck!
How do I fix this:(
I am so frustrated with this watch! I guess you get what you pay for... I mean it was pretty cheap. Okay, so I think I figured out the time situation, but I cannot for the life of me change the alarm. It is now going off in the middle of the night and I think my husband is going to leave me for someone who can actually set their own watch.
Thanks for the help--- I was very fustrated until finding answers here! Great site!
Thank you K for your instructions!
Worked perfectly.
purp
le and digital
no instructions included. not easy to figure out on my own.
Reset
×