At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to set the needle plate setting nob on the janome...
Push blade from right to disengage...slide roll hem ****** forward...reverse operation to return to ordinary sewing. It is covered in the manual, do you need one ??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Janome Overlockers (sergers) are set at the factory with #14 Red Tip needles
For finer fabrics, the #11 Blue Tip is good
If the #11 breaks, then try a #14 as they are a little heavier duty
You can always: Contact Us at Bargain Box
Have a look at the detailed descriptions on these links Accessories Parts
The needles required will be listed in your manual, if you don't have a manual then buy any needles recommended for sergers/overlockers. Or check on the Janome website.
Sorry, From Left to the Right for the blade...then 1/2 turn to offset blade out of the way to disengage....don't forget to put blade back to correct position !!
I think Janome Mylock 134 has 2 separate needles. They are #11 or #14 for sergers and secured by 2 independent setscrews. I saw on ebay the instruction book with the owner's handbook for Janome Mylock 134D.
this very same thing happened to my flat machine turned out to be a piec of material jammed in the workings also wrong oil used or it might be thread jammed try and see
Set you differential at 1.0 and your loopers at about 3-4 the needle thread tensions are usually around 5 to 6. I would also suggest that you place four different color threads on machine to make it easier to adjust all. Now if you are using only 3 threads the same applies. Also------patience.
×