Need username and password for nod32 4.2.71.2

For most NETGEAR devices (except ReadyNAS/ReadyDATA products and Fully Managed Switches), the default username and password is:

• Username (all models) = admin
• Password (current models) = password
• Password (very old models) = 1234

Default username and password for ReadyNAS/ReadyDATA products:

• Username (all models) = admin
• Password (ReadyNAS OS and ReadyDATA OS) = password
• Password (RAIDiator firmware) = netgear1
• Password (Infrant firmware) = infrant1

Default username and password for NETGEAR fully managed switches:

• Username = admin
• Password is blank (no need to enter any password).

Reset your router back to it's factory settings by holding the reset button for about 5 seconds.
I have provided a list of the most popular router brands. If it does not work you may need to
google what your specific model's default IP address/default username/default passwords are, for
example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it
can depend on where you obtained your router. If you purchased it yourself from a store then the
standard defaults should work. If you obtained your router from your Internet Provider you may
need to contact your service provider. It also may depend whether it's an old or new model router
as well. And you may need to press and hold the reset button on your router several times before
it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is:
192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or
192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your
router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Use these :

Username:EAV-49155849
Password:nscherb3kh

Username:EAV-49153926
Password:p6av4m3ned

Username:EAV-49155265
Password:2m6aus3634

Username:EAV-49155912
Password:5stk6hr2xk

Username:EAV-49155915
Password:h5tct7cd3a

Username:EAV-49155269
Password:vnkfn7b8hr

TRY ONE OF THIS AND DON'T FORGET TO RATE


Username: EAV-30046840
Password: 43xm3j2aen
Expiry Date: 25.07.2010
Username: EAV-30047000
Password: mj4nmbudvk
Expiry Date: 25.07.2010
Username: EAV-30518969
Password: m6ksru4vm6
Expiry Date: 28.07.2010
Username: EAV-30191114
Password: a5utejpdvm
Expiry Date: 29.07.2010
Username: EAV-30662248
Password: tc45mbsaex
Expiry Date: 02.08.2010
Username: EAV-30490460
Password: pv3hcjvc44
Expiry Date: 06.08.2010
Username: EAV-31499771
Password: v3te8xpasu
Expiry Date: 05.09.2010
Username: EAV-31499778
Password: u84apanjkt
Expiry Date: 05.09.2010
Username: EAV-31502567
Password: ueee6cuctx
Expiry Date: 05.09.2010
Username: EAV-31550064
Password: rd7fcrks3u
Expiry Date: 08.09.2010
Username: EAV-21460280
Password: k4tjae4maf
Expiry Date: 12.09.2010

there are few username and password which your router accepts
try these

Username - user
Password - user

Username - admin
Password - admin

Username - admin
Password - cciadmin

NEW PASSWORD

Open Winrar

in the address bar type the D:

all the file like

ravmon.exe
folder.exe
autorun.inf
found.000
smss.exe
etc

delete those by pressing shift + delete key

If it give you error then Reinstall the windows again and delete the previous one from c:

then do the following things that I said

And remember as you double click the d:\ the virus gets activated and your PC will become slower day by day

Use NOD 32 2.7 old version which is better then the latest version then update is

10 September 2009 username and password of nod32

Username:EAV-20830846
Password:p45sbe3ax3

Username:EAV-21097603
Password:bc7j4n2rj5

Username:EAV-20541617
Password:6srdsue8d8

Username:EAV-20544234
Password:pxtdf8m4th

Username:EAV-21228225
Password:dfdvte246a

Username:TRIAL-21227315
Password:ct63tfvfjx

Username:TRIAL-21227321
Password:fjk6fpja3h

Username:EAV-20831172
Password:aea6jnxu8j

Username:EAV-20806371
Password:53epdv4mtx

Username:EAV-21247677
Password:hrvfkxk3sd




eset nod32 keys and eset nod32 username and password NOD32 ID september 9, 2009


Username:EAV-21247677
Password:hrvfkxk3sd

Username:EAV-20830846
Password:p45sbe3ax3

UserName:EAV-21097603
Password:bc7j4n2rj5

UserName:EAV-20977108
Password:uetk8tmx7e

Username:EAV-20541617
Password:6srdsue8d8

Username:EAV-20544234
Password:pxtdf8m4th

Username:EAV-21228225
Password:dfdvte246a

Username:TRIAL-20993870
Password:chbps48hn2

Username:TRIAL-20993869
Password:2b5hta8bxj

Username:TRIAL-20993866
Password:efuf3nvd7a

but one Important thing Please Vote me first

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser.

By default the ip address should be set to 192.168.1.254

type .........http://192.168.1.254


You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are blank.
Click the Ok button to log in to your router.

If you already had a password, you need that or need to reset the router to factory settings in order to start over again.

Use default username and password, should be found under the router.

Try:

Username: admin
Password: admin

Username: admin
Password: password

Username: admin
Password: sky

Username: admin
Password: (blank no password)