I have Sanleford YB 500a safe, I lost the code, any way of opening it???? thanks

I Personally don't think that these should be sold as "safes", but that is a discussion for another thread

There is no such thing as a general code to open safes. So the only thing you can do is write down all codes you ever used, and try thm one by one. Sorry, but if there was any "backdoor" in a safe, the code should be useless.

Goto Main Menu > Options > Cheats > Enter Cheat in game. Use the following codes ( R - Red, G - Green, O - Orange, B - Blue, Y - Yellow ), without strumming.

Unlock everything (no audio will play when entering this code)[GRBO] [GRYB] [GRYO] [GBYO] [GRYB] [RYBO] [GRYB] [GYBO] [GRYB] [GRYO] [GRYO] [GRYB] [GRYO]Unlocks All SongsYO,RB,RO,GB,RY,YO,RY,RB,GY,GY,YB,YB,YO,YO,YB,Y,R,RY,R,Y,O
Codes pulled from Gamefaqs. They're an awesome website for game cheats, reviews, walkthroughs, etc.

Have fun!

Welcome to FixYa.

How to reset or change your lock combination:

• 1. Enter "zero" six times.
• 2. Enter your existing six (6) digit combination one time. (or 123456, factory default if you haven't changed the combination yet.
• 3. Enter your NEW six (6) digit combination two times.
• 4. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 3.
• 5. Test lock operation several times before closing the door.

CAUTION: When selecting a combination do not use birthday or other predictable data that could give correlation between the user and combination.

• Valid Combination Entry - Double signal after valid six (6) digit combination is entered.
• Invalid Combination Entry - Triple signal indicates the old combination is still valid.

Thank you for using FixYa.
Have a great day.

Jas247

Try re-pairing the headset to the Plantronics 500A base unit, it sounds like the headset may have lost connection with the base. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions

Good luck from Headsets Direct!

It sounds like the headset may have lost connection with the base, try re-pairing the headset to the Plantronics 500A base unit. Here is the link for the pairing instructions:

Plantronics 500A Pairing Instructions

Good luck from Headsets Direct!

The Plantronics Voyager 510S / 500A base should work just fine with the AT&T phone, here is the link for the user guide below.

Plantronics Voyager 510S/500A User's Guide

Good luck from Headsets Direct!

Depending on model, some safes have a key override that can be used to open the safe. Most models do not. Without a key override, probably the only thing you can do is to contact a lock smith, otherwise, start checking each possible code combination until you find the correct code.

If there are valuables in the safe, then take it to a locksmith. Otherwise, it might be cheaper to get another safe.

1. The original factory code is 1-5-9 A (or B) to open the safe. There is usually an override key for your safe in case you have lost your code.
2. Once the unit is open, you can reset the combination by pressing the red button, the yellow light will come on. Input a new code 3-8 numbers and then either the A or B button to finish the code.
3. Test your new code several times before locking.
4. If you don't have an over ride key, the first three digits of the serial number should be the key code.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

i got the same problem i lost my key and cant open now
any idea what to do