Error code dr-000903 - Office Equipment & Supplies

circulation pump failure

Hot Tub Error Codes - Spa Topside Error Messages

Hot Tub Essentials https://www.hottubessentials.ca > hot-tub-error-codes
1) Hot Tub Error Codes (Alphabetical) ; COOL, Spa water is more than 20° F cooler than the temperature set point ; CP-ER, Circ pump failure ; DR, dr, dy?

RTM yet, read the manual is always first best ACT .
not getting lies off internet dweebs never seen one ever.
DR-G1100? forgot the G?

the manuals all , show E codes are all call for service errors.
seen here 1st googe it, G1100

https://files.canon-europe.com/files/soft03-48838/Manual/DR-G1130_1100_User_Manual_EN.pdf



Error Code: Exxx
Problem:Internal scanner error.
Solution:Turn the power OFF, and restart the scanner. If
this does not solve the problem, make a note of the error
code, and contact your Canon service representative.

https://www.manualslib.com/manual/25164/Canon-Image-Formula-Dr-7550c.html?page=57


I did not see the error code in the manual for a related model above.

I see that others tried several part replacements without success according to the discussion at the link below:

http://www.copytechnet.com/forums/canon/111249-e033-error-code-dr-g1100-scanner.html


http://www.copytechnet.com/forums/canon/111249-e033-error-code-dr-g1100-scanner.html

Exact same thing happened to me. After a power failure my Frigidaire stove worked and the clock worked but bake broil and self clean gave me a DR error. Tried everything to reset nothing worked. When I unplugged and plugged back in I got an f13 code.I changed the control board and the entire oven is back in business!

DR is a drain error. Have a look to see if the drain filter is blocked (if fitted) or if there is an obstruction or blockage in the pump or drain hose. If it cant pump out, the machine will stop during the cycle.

Good Morning Friend,

I understand you are receiving a "DR" error code on your Frigidaire Affinity washer, model ATF7000E. The "DR" error code is stating that there is a possible problem with the door. This could also be a possible false error code. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your washer status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Hi - Typically DR is a generic door error code. Possibly the door is not shutting properly, either it is sagging and not latching properly or the door sensor and the main control board are not communicating correctly. You would need this to be diagnosed by a professional technician in order to properly repair the machine.

Dr or DR is a generic door error code. Either the door is not shut properly, door is sagging and not latching properly or the door sensor and the main control board are not communicating correctly. You would need this to be diagnosed by a professional technician in order to properly repair the machine.

Are you sure the error code is DR? Could it be DC an unbalance error code. Google ""16022808.pdf"" to find. Is the washer banging around in Spin Cycle? If so this is a Clutch Pulley issue.

Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.

DR is not a listed error code in the FAV6800A/FAV9800A Service Manual.

'dr' is an error code that indicates the door is not closed. If closing properly the door lock may have to be replaced.