I have a 2007 Yamaha jet ski. I was able to use a 10mm open end wrench and remove the latch from the seat. If you look through the grab handle and under the seat you can see the post that holds the seat and in either side you can see the bolts holding the latch on. Only a small portion on the bolt head is visible so you have to be patient as there is very little room to maneuver. As you slowly, an 1/8 turn at a time, remove the 2 bolts the latch will come away from the seat. Good luck.
As bad as this sounds its the only way. Grab yourself a 2x4 and a nice size prybar.
Lay 2x4 across the back grab handle as to not damage it then put prybar directly under seat latch and pop it up.
2,915 views
Usually answered in minutes!
×