Codes for curtis mathis tv

Have you tried downloading the user manual for the TV model you have if there are codes for the REMOTE it should tell you .

028,022,027. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too.
http://electro-medical.blogspot.com/

I found a perfect fix for the 32 inch Quantum View TVs with a DirecTV remote.

Press Menu (on your directv remote) , go to settings/help>Settings>RemoteControl>Program Remote>TV.

When prompted to choose a brand, select CURTIS MATHIS. The codes from Curtis Mathis should match the codes for your Quantum View TV.

Note: Make sure the remote can 'see' the receiver during this process.

Hi rosecorbin,my name is Mike Houston of DISH Network and I wanted to give you the codes toprogram your remote to your Curtis Mathis TV. The codes are; 516, 573, 680,652, 665, 667, 668, 670, 674, 659, 590, 650, 664, 708, 641, 645, 703, 712, 526,660, 654, 658 and 506. You will need to push and release the TV button and pressthe 3 digit code and press the # button, I will also leave the steps for a PowerScan. http://www.dishnetwork.com/SupportSection/sat-autotune

www.remotecentral.com

Hello

Thee digit universal remote code for Curtis Mathis are:-
000/ 001/ 004/ 009/ 015/ 031/ 049/ 105/ 109
Four digit universal remote codes for Curtis Mathis are:-
0031 0105 0130
0004 0009 0000 0049
0109 0358 0001 0015

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

We would be happy to help you with getting your DISH Network remote to control your TV. located on the top of your remote until all mode button back lights come on, then release. Use the number buttons to enter the codes foryour Curtis Mathis TV; here some of the codes we currently have: 516, 670, 219, 507, 674, 680, 708, 664, and 650. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Keep in mind that some codes may not be compatible with your equipment. If this is the case, please try the other codes listed for that device until you find one that is compatible with your equipment.

We hope this help and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Try these codes for your remote and TV. The are the Zenith codes for a Curtis Mathes TV.

CURTIS MATHES.....002 103
............................. 112 502 506
..................... 512 601 701 704

These should work.

Regards,

Mike

I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

We also bought a universal remote to program a Curtis Mathis TV. We found the code by using the code search method. It works everything but the channel program feature. Does anyone know how to access that? BTW the remote is a GE 24921. Thanks