Dect 6 Manual

Hi Angie.

The manual for this phone can be viewed here:
http://cdn-media.vtechphones.com/ecp/documents/product_Product/1681/UserManual/6351/ls6425-3_manual_i3.pdf
On Manual Page 20 / pdf page 23, it says that if the ringer is muted for a single call, that it should work again the next time someone calls.

However. page 57 notes that the base ringer volume can be set between 0 and 6, so it's possible your ringer volume is not technically muted, but just turned all the way down.

Manual page 62/pdf 67 has a half-page list of other reasons that the ringer might not ring. (It can also be turned off, and there are different adjustments for both the phone and the base unit.

Hoing this lets you figure it out!
D

Settings - ringtones- ringtone settings- ring type - select an option that suites your needs. There should be "ringing, accending, ring once, beep once and silent. You then select RINGING.

enjoy :)

Select the model of your Uniden DECT 6.0 phone from the list beginning at http://www.uniden.com/scat/dectphones_mnl to download a copy of the manual.

Since you neglected to specify the model of your Uniden DECT 6.0 phone I can't be certain, but on many models you press the up-arrow button on the handset while the phone is in standby mode to raise the ringer volume.

Select the model of your phone from the list beginning here to download a copy of the manual for the exact instructions.

The procedure varies from phone to phone. Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual.

The procedure to turn on/off the ringer varies from model to model. Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual.

Since you declined to specify the model of your GE DECT 6.0 answering machine, I can only suggest that you select it here to download a copy of the manual.

With the phone off, press the #/pause button. The display will show "set ringer level 5", using the caller ID/volume button scroll to the level you want. Press the #/pause button to save your setting.

You didn't post the model number of the phone, but here is a link to a user guide for a GE DECT 6.0 phone: http://www.home-electronics.net/ge/pc/IB/27907GE1_IB.pdf

It doesn't list a Do No Disturb function... Is it possible that you have the ringer volume turned off?

Hope this helps!

http://www.home-electronics.net/ge/pc/IB/28115FE1_IB.pdf

GE phones are distributed by Thomson Electronics...the manuals are available at:
www.hom-electronics.net