I need to put my belt back on my dryer but not sure how it goes on a amana model number NDE2335AYW i need a diagraham on how it goes on

Hi and welcome to FixYa I am Kelly,

The routing is here around the motor and idler pulleys: (AMANA all models)
http://www.repairclinic.com/Dryer-Belt-Diagrams#DiagramA

Hopefully this is exactly what you needed. If not, respond here and I will help you. Thanks for choosing FixYa, Kelly

http://shop.ebay.com/i.html?_nkw=amana+pulley+&_cqr=true&_nkwusc=amanna+pulley&_sop=16&_rdc=1

Hi,
Here is your diagram...

Dryer Belt Replacement Replace Dryer Belt Admiral Amana Asko Crosley ...heatman101

you gave the model number it's NDE6800AYW,the belt part number is 33002535 and it's around 25 bucks

Thre are a couple of different ways, the dryer belt goes back on a Whirlpool manufactured dryer (including Kenmore). However, since you posted no MODEL NUMBER, I can only give the following advice:

Go to repairclinic.com and click on the "Repair Help" link at the top of the page. On the following page, look for the "Dryer Belt Diagrams" link under the "Special Features" section. Refer to diagram H or K.

If you aren't sure which configuration to use, please post back with your model number, so I can provide you with a more difinitive answer. I hope this helps you.

Sounds like the screen/sock combo got the tub in a bind and the drum belt broke.

If you want to pursue replacing the belt, let me know.

Here is a pictoral of a variety of different BELT CONFIGURATIONS for dryers

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

That means that your motor is going . I'm not sure how much your willing to put into it but that tends to be kind of expensive. good luck

call me if you'd like and i'll walk you through it Jim 417-926-0106

Found my problem. The 3 prong unit on the cord connecting at the dryer. One of them was melted. Glad my house is still standing.