What's your problem?the wiw has trouble reading the disk

You are not doing anything wrong - your player is in its ***** throes and soon it will stop reading all disks all the time.. Start saving some money for a replacement.

You can try Nintendo's Wii lens cleaning kit. Also, some older Wii units have trouble with dual layer discs, which pack more info onto a disk (Super Smash Bros. Brawl and Metroid Prime use dual layer discs). If your Wii is having trouble reading a dual layer disc you can try Nintendo's Wii lens cleaning kit for that too.

If after cleaning its lens your Wii still can't read any disks then you'll want to contact Nintendo.

You can try Nintendo's Wii lens cleaning kit. Also, some older Wii units have trouble with dual layer discs, which pack more info onto a disk (Super Smash Bros. Brawl and Metroid Prime use dual layer discs). If your Wii is having trouble reading a dual layer disc you can try Nintendo's Wii lens cleaning kit for that too.

If after cleaning its lens your Wii still can't read any disks then you'll want to contact Nintendo.

Good Luck!

You can try Nintendo's Wii lens cleaning kit. Also, some older Wii units have trouble with dual layer discs, which pack more info onto a disk (Super Smash Bros. Brawl and Metroid Prime use dual layer discs). If your Wii is having trouble reading a dual layer disc you can try Nintendo's Wii lens cleaning kit for that too.


If after cleaning its lens your Wii still can't read any disks then you'll want to contact Nintendo.

The problem is in the laser pickup assembly, the pladder motor is not working that spins the disk, and unfortuneately the only way to correct this is to replace the entire assembly which probably won't be cost effective.

Hello,

Is it stuck at this screen? If so, try shutting down the PS2, then remove the power cord for 5 minutes. Plug the power cord back in and turn the system on.

Also, if the PS2 is having trouble reading the disk it will do this. You can try another disk because maybe the one you are using is scratched up. The system may have to much dust and dirt inside causing disk read problems. Try a can of compressed air and see if you can blow some of the dust out from inside the disk drive!

Regards,
G33k

Hi,

If the Wii is having trouble with a disk, it means there's either a problem with the disk or the Wii.Since that your Wii is having a problem reading al disk there's might be a problem with it. Some older Wii units also have trouble with dual layer discs, which pack more info onto a disk .If your Wii is having trouble reading a dual layer disc you can try Nintendo's Wii lens cleaning kit. If still having an issue better call Nintendo for further Support. You might have a Bad lens on your Wii.

Thanks for reading. Thanks for using Fixya.

Hi lyned1,

If the Wii is having trouble with a disk, it means there's either a problem with the disk or the Wii. If your Wii can't read any disks then you'll want to contact Nintendo. Otherwise you need to investigate your disk.

If you hold the bottom side of the disk to the light you should be able to see if there's a smudge or scratch. If it's a smudge, cleaning the disk will often fix the problem. Use the microfiber cloths used to clean eyeglasses or, short of that, a tissue. Just rub the smudged spot. (When using a tissue I generally steam up the spot with my breath first.) If the disk looks good, put it back into the Wii and see what happens.

A scratch is more problematic. If it's a game you just bought, try exchanging it where you bought it. Otherwise you can try polishing out the scratch.

Some older Wii units also have trouble with dual layer discs, If your Wii is having trouble reading a dual layer disc you can try Nintendo's Wii lens cleaning kit. And also you can try to use a different disk to check if your system will be able to read it. then try the Wii Fit Plus If after all that, your Wii still can't read the disc, it's probably just a bad disc.

Thanks for using Fixya.

Try using a Iris eye cleaning disk. Mosxt times when constant reading occurs or it says no disk it is the iris inside that has become occluded with dirt. Checkl that there are no finger marks on the disk and it is clean too

Once you have run the cleaning disk use a non scratched clean disk to check its load and read ability before trying in the disks that you had trouble with.

If they still give trouble then the problem will be with those disks and not the laser in the unit.

Please rate my help++++Thanks for using FIXYA

The Asrock P4VM8 motherboard does not have a PCIE slot. Only a AGP. Listed below, click the link:
http://www.asrock.com/mb/overview.asp?Model=P4VM8
Unless you have given the wrong information. Please clear this issue before I can help.