I need the manuals or code list for Whirlpool Duet - GHW9150PW0????

Water valve bad.

http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Washer-Parts/Model-GHW9150PW0/1198/0153200/W0501061/00002?blt=06&prst=&shdMod=

Unplug for 3o seconds

If the drain time exceeds eight minutes, the water valves are turned off
and “F/02” is flashed. Press PAUSE/CANCEL two times to clear the
display.
NOTE: After four minutes the “Sud” error will be displayed, then four
minutes later the “F/02” error code will be displayed
Your tech sheet? GHW9150PW0 Tech Sheet # 8182277 Rev #

Duet service manual and codes

Was this solution helpful?

Rate it or hate it:


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

your inlet vaulve is sticking and allowing water to trickle through, only solution is to find if it is your hot or cold vaulve and replace it

change control

Replace the basket locking pins that were removed when you first got the dryer.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Hi, one of our baffles broke recently and I ordered a replacement kit from http://www.appliancepartspros.com/

Here is the link that will take you directly to the page:

http://www.appliancepartspros.com/Appliance-Parts/WHIRLPOOL-Baffle-kit--3-pack-item-number-AP3769371.aspx

how do I find the answere to the F11 problem posted by jsrock516