I have a richo 2018d all in one copier machine. when I powered machine a error code genereted sc 541 what is the solution
SOURCE: code 541
Hi,
SC 541 is a fixing unit error, clean the thermistor and then reset the code by pressing clear(yellow) then 107 and hold stop(red) key for 5 to 10 seconds then the display change. now turn off the machine from main switch, wait for five second and then turn on the machine.
this will reset the SC541. in case if the problem exist change your thermistor and check the thermostat.
.
2,178 views
Usually answered in minutes!
×