How can i fix system error 11do on hp designjet 9000s

changed usb cord from 4meter to 1meter-reinstalled hp9000s driver-i did cracked software again with p.exe in the install folder-launched onyx 10-restarted hp 9000s printer

more information on th link

HI,
Please reinstalled Printer driver or restart computer or printer then you new driver installed it. Or installation before scan virus and removed it. Or proper check it all connecting cables.
Read more Help.. HP DESIGNJET 9000S SYSTEM ERROR 1120 and HP Printer Support

Thanks,

como arreglo E E0040 de Hp Designjet 9000s

The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from
the Linear Encoder Sensor does not change.
You are going to need a tech to check out the plotter.

Hp designjet 9000s system error 1701

hey how are you

System Error 11D0: Cooling Fan Error
Problem
Description:
When the Printhead temperature reaches above 43oC, the Printer will check
whether the temperature drops below 43oC during printing. This error will
appear if the temperature does not drop below 43oC after 10 minutes.
Corrective Action: Try the following:
Make sure that the Printhead Cooling Fans are working correctly. If the
Printhead Cooling Fans are not working correctly, replace them.
Make sure that the Printer Cooling Fans are connected and working
correctly.

that means that there is an error with the actual printer. The best thing to do is to take it to where you have purchased the device and they can then see what is causing the problem physically and if its still under warranty they can then swap it out for you

System error 1290 on Designjet 9000s

sistem error 1290