Need online manual for COBRA microtalk 2way radio

http://www.wedophones.com/Manuals/Cobra/FRS%20-%20GMRS%20microTALK%20Manuals/PR100_manual.pdf

It can be transmitter of one device doesn't work. There are special testers...

Try here Support Cobra Electronics Corporation

The channel codes may be different between your radio and other brands. If you google FRS radio frequencies/codes you may find the cross reference you need.

First of all, thank you very much Gail for choosing FIXYA today for your online technical support needs.


Here is a direct link to the ONLINE USER'S MANUAL for the COBRA MicroTalk 2-Way Radio model FRS120 which is the closest model I could find to the one you quoted:


https://www.cobra.com/downloads/manuals/FRS120_Eng.pdf

To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted section of text just above.


This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.


You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed.


You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.


I truly hope that was helpful to you.


Good luck and take care.


Joe.

First of all, thank you very much for choosing FIXYA today for your online technical support needs.


Here is a direct link to the ONLINE USER'S MANUAL for the Cobra Microtalk model CXT125:



https://www.cobra.com/downloads/manuals/CXT125_MANL.pdf



To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted text just above.


This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.


You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed.


You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.


If that is not the manual for your exact model of Cobra Microtalk 2 Way Radio, then just check the list of user manuals at the following link for the one that matches your exact model number:


https://www.cobra.com/pages/manuals.cfm


I truly hope that was helpful to you.


Good luck and take care.


Joe.

Probably time to trash and purchase new.
Try Cobra tech support directly here: Support Cobra Electronics Corporation

Here is the link for the manual for the Cobra radios: http://www.retrevo.com/support/Cobra-PR-3850WX-2-way-Radios-manual/id/23311dj078/t/2/

The manual for the Cobra microTalk PR190-2 is available from the Cobra site. The direct link to the PDF is: https://www.cobra.com/downloads/manuals/PR190_MANL.pdf . If the direct link doesn't work, start here: https://www.cobra.com/pages/manuals.cfm and scroll down in the Two-Way Radio section.

I hope this helps.

Cindy Wells
(the user's guide above is only a one page document.)

I couldn't locate your specific model, but all of the Microtalk series radios seem to be basically the same as far as operations. Follow the link below to a manual that you can download/print -- it should work fine with your radios:

http://www.cobra.com/downloads/manuals/PR4000WX_manual.pdf

Bill B