Nordic track c1900 how do I remove the hood ?

ASK NORDIC WE ARE NOT THEIR SERVICE TECHS

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

Drive belt appears to have stretched. Happens over time. Needs replacement - available from the manufacturer and this site. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR1.TRC0.A0.H0.Xnordic+track+c1900.TRS0&_nkw=nordic+track+c1900&_sacat=0

please see the video attached and block diagram. follow the steps and fix it. God bless you
Test the fuse and c.breaker for open and reset the breaker.

please the next video and use the common sense. God bless you

Download a manual for this model . This will make it easier to find the hidden screws.

My belt is slipping I tighten both alan head screws to the max roughly 7 turns and still have the broblem

swflafitness - Your suggestion worked perfectly for me, thanks!

tighten running belt evenly

I have the same unit. First, remove the hood. Then, the motor has an adjustment screw on the belt side of the motor. Loosen the nut a little, adjust the motor up or down to make the belt as tight as you can by hand, then re-tighten the nut. This always fixes mine.