GE Profile WPRE6100G Top Load Washer Logo
Posted on Sep 20, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

GE Profile WPRE6100G will not spin

After a power outage my GE Profile Top Loading Washing Machine, Model: WPRE6100G, will not agitate, nor spin. All the control panel function seems to work, but no apparent motor action. I have try reset the circuit by unpluging the machine and opening and closing the lid more the 10 time. No positive result. Need Help. Thanks

  • Anonymous Oct 08, 2008

    GE profile top load will not fill or spin but it will drain.

  • Bmacc6420 Dec 29, 2008

    Same thing happened to me. I dont think its the lid switch... I had some recessed lighting put in the same room and afterwards the washer will only fill up with water or drain, wont agitate or spin. The dryer still works perfectly fine. Is there a fuse for the motor that could be blown or is the motor fried possibly? Thanks

×

1 Answer

john gagnon

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 943 Answers
  • Posted on Sep 28, 2008
john gagnon
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Sep 11, 2008
Answers
943
Questions
1
Helped
324076
Points
2163

Hi thanks for the question. i think the problem is with the lid switch . lifting the lid 10 times wont help if the switch is faulty check the lid switch thanks the appliance doc

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

GE Profile WPRE6100G tub spins while washing

My parent's Hotpoint did the same thing!! The brake on the bottom of the tub is not engaging! It needs replaced!!
2helpful
1answer

Washer fills with water and drains but will not agitate or spin out

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

1helpful
1answer

Washing machine will fill and then noting .wont agitate wont spin but it will drain.

bad door switch or lid switch take the wires off the switch you'll have to raise the top if its top loading and disconnect the wires from the switch with the washer unplugged and temporary wrap electrical tape around them together and see if it will work if it does its the switch if not reconnect wires and get back in touch with me.
1helpful
1answer

Washer will not agitate or spin

belt could be broken. If not try unplugging for two minutes, then plug back in and open and close lid seven times slowly to reset computer than runs machine.
0helpful
1answer

Wash machine will fill but not agitate or spin

Check the lid switch. GE will not go beyond fill with the lid pen and if the switch fails the machine thinks the lid is up. Eric
1helpful
1answer

GE front loading washer, WJSR2080T6WW, agitates, drains, wont's spin

might be a transmissin problem, ive seen the brake get too tight on these units to allow spin
0helpful
1answer

Washer will not agitate or spin

HI,

you can view this site to have some ideas about your agitator problem.

http://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin/agitator-woes

any further question let me know.

thanks,
10helpful
2answers

GE profile washing machine won't agitate it spins out, drains,

Pull the agitator out and check the drive collar splines.If you have the model I think you have just pull straight up on the agitator. Once removed you will see the drive collar with a 7/16 head bolt,remove it and pull off the collar.First before pulling it off spin it if splines are stripped it will spin freely.
Not finding what you are looking for?

858 views

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Virgil Watts

Level 2 Expert

267 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...