The speaker on the 605 wifi archos is buzzing and doesn't turn off when I plug in headphone jack.

There should be a way to do that. 1st make sure speaker jack is fully inserted. If you still have same problem try normal headphones and see if there still is foreign hum- then if headphones work, check the size of both the jacks to see if there the same- you might just have wrong size jack. If that is not the problem the Impedance(ohm symbol) is probably wrong and the phone doesn't have enough power to drive your speaker.. Use a speaker with same Impedance, you might have to use a speaker with its own power supply to get appropiate volume. You could try your PC external speaker. I hope this has been helpful.

Look on ebay... or find some small speakers from something similar and use those.

Unfortunatly there is not. I have tried many times when I had my 605 and was unable to find a working copy of opera that would run on the 605. Ended up buying the plug in and that worked like ****.

I fixed my son's 605 4 GB had Recovery code (104) on it These are the steps i followed
* Use the computer for this process that you always used for this archos
* Download the firware Upgrade 2.1
* Plug the Archos to Pc
* When the white screen comes up do format
* Wait until all done then put the firmware in to the root sector of the Archos
* Safely remove the usb for Archos from your pc first and then unplug the cable.
* Do not pick any option on the Archos screen
* Just turn it off from the power button by holding it until it turns off
* Wait about 5 minutes and plug in back to pc
* it will come up with white screen again but this time it will start Update you will see the progress bar moving wait until it is all done and it will shut off. Turn it back on Your archos will be back to normal.
When you go to download from Archos site it will explain how to download depending upon how your device pops up on your Pc.
Hope this helps

THe same thing happened to me instead of doing it directly on your archos do it on a computer it is much easier and takes less time.To this day i am still calling the Archos company trying to figure out why it is doing that.

If I remember correct, then when I updated my Archos by hard reformat you have to request Archos resend the plug-ins, as long as you have the reciept or email.

Archos Dish Network Plug-In says:
FREE Dish Network Plug-In  

 Quickly transfer hours of your favorite TV programming from select DISH Network DVR receivers and enjoy the shows you watch every day- on the go.

 DISH Network customers with ViP622TM and ViP722 TM DVR receivers can enjoy this next generation of PocketDISH service with Archos 605 WiFi and Archos 705 WiFi models

 This plug-in is free for DISH Network Customers.

 Not a DISH Network customer? Find out more at www.dishnetwork.com and get the most out of your Archos player today

i had the same problem what i did was i downgraded my 605 to
Archos 605 Wifi (20GB-160GB) OS v 2.0.10

then i upgraded to Archos 605 Wifi (20GB-160GB) OS v 2.1.04
heres the link for 2.0.10 http://update.archos.com/5/a605/a605_r2.0.10/firmware_a605.aos
and heres the link for 2.1.04 http://update.archos.com/5/a605/a605_r2.1.04/firmware_a605.aos

you need to buy the wifi plug in from the archos website, then unload it on to device

my touch screen for my archos 605 wifi is not functioning right. How do i resolve this problem?