I need to remove the stand from my Toshiba 37HL67 so I can mount it on the wall. Can you help me. Auburn [email protected]

In the link. You can use the wall mount with a base.

https://www.google.com/search?q=table+stop+stand+for+Toshiba+model+32lv67u

..

If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Disassemble procedure to many popular devices are given with illustrations.

To disassemble it, you have to see some illustrations. If you wish to get more details about how to disassemble Toshiba TV, check this link. http://electronicshelponline.blogspot.com/ Pull up older posts there. Disassemble procedure to many TVs are given in detail, with illustrations.

Check out TVPartsGuy.com i know they have a large inventory on TV Stands. Use promo code JVC10 to get 10% off of all your TV Stand purchases.

Welcome to FixYa!

On the link below will tell you how to remove the stand. bottom of page 5.

http://www.tacp.toshiba.com/tacpassets-images/models/37hl67/docs/37hl67_om_e.pdf

Good Luck

1)Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.

2)Remove the jack pack cover on the back of the TV to expose
the pedestal stand screws. The jack pack cover can be removed
without tools.

3)Remove the five screws shown in the diagram below. This will
allow removal of the pedestal stand.

4)Once you have removed all five screws holding the pedestal
stand in place, remove the pedestal stand from the TV by
sliding the pedestal stand away from the TV.

5)Now you are ready to install the wall mount brackets
I hope this helps and good luck!

Look at one of the power supply output connector pin, there should be 5vdc all the time the minute you plug the TV into the wall outlet, if you do not have the standby 5vdc, nothing else will work. No sign of burnt parts, bad capacitors? You can get parts here: http://www.shopjimmy.com/catalogsearch/result/index/?q=Toshiba+37HL67+&p=2&stock=all
Please post feedback what you find.

Found this on the www.Toshiba.com website. Q. How do you remove the stand?
Models: 26HL37, 26HL47, 32HL17, 37HL17, 42HL17, 32HL37, 26HL67, 32HL67, 37HL67, 42HL167, 42HL67,
47HL167, 52HL167, 42LX177, 46LX177, 52LX177, 57LX177
REF:FAQLCD00078
1. Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface. NOTE: Extreme care should always be used when removing the pedestal
stand to avoid damage to the LCD panel.
2. Remove the jack pack cover on the back of the TV to expose the pedestal stand screws. The jack pack cover can
be removed without tools.
3. Remove the five screws shown in the diagram below. This will allow removal of the pedestal stand.
4. Once you have removed the five screws holding the pedestal stand in place, remove the stand from the TV by
sliding the stand away from the TV. The Toshiba customer service number is 1-800-631-3811. Hope this helps you with your problem.

how do you remove the stand of lg 50pg30fd so it can be wall mounted