Hello , I will be glad to help you.As far as your speakers..It depends on what impedance your subs are rated and if your Picasso amp can be bridged at 4ohm or 8ohm. If your subs are 8ohm each you can wire your subs in parallel and wire them to picasso amp in bridged mode. If your subs are 4ohm each.Then wire the subs in series then wire them to amp in bridged mode..caution do not wire subs in parallel if they are 4ohm .This would bring impedance to about 2 ohms and would be harsh for amp to handle...Goodluck
if subs are 8ohms each then wire them in parallel .This will give you 4ohm and should be okay for amp in bridged mode.Just make sure to adjust gain on amp properly .
wire the two voice coils on each sub in series .positive from one coil to negative from other coil ( same speaker).You should have 2 terminals left ..do the same to other speaker..Then wire the two speakers in parallel..This will give you a 4ohm load to bridged amp..
×
441 views
Usually answered in minutes!
The speakers have diagrams for 2, 4, & 8 ohm. These are the specs
Dual voice coil
Impedence: dual 4 ohm
The 4 channel amp produces the most power at 4 ohm bridged.
×