I am having another baby and still use my summer baby monitor on my first child. Can I add a monitor for the new baby and use my video base with both.

if camera and base are within a few feet of one another does it have a problem obtaining a signal (syncing ) ?? as if it works ok then there might be a object that is getting in the way of the signal , radio waves move from its transmitter (camera) towards its receiver (monitor) in a straight line , if there is too large a mass in the way then the radio wave can't penetrate it and will be "lost" also ck both the camera's and bases battery levels (if they have one) for proper peak power level , as it takes energy to drive the radio signal towards its receiver .

I would say that your IR sensors are burning out. Turn the lights off and look at the camera. A bunch of small red lights should be coming on . You will see which ones and how many are burned out. There are a couple of fixes but the cheapest will be a new camera.

I just barely had this problem and was able to figure it out.

You need to hit the "ok" button on the side of the handheld monitor. It will only let you select "add camera".

Hit ok again and it will give you a list of 4 camera's.

Now at this point you will need the actual camera and handheld monitor. You need to hold down the "code" button on the back of the camera and select "camera 1" in the list of 4 cameras. This should sync it back and you should have picture again!

if you fone the company up they will tell you or replace it if it was recently bought

just decide which camera you want next one to be so say camera 2 on your monitor and on the back of the camera you want to add there is a pairing button press it and it will pair, and the just add on to the next one say camera 3 if you have another camera just press the pairing button on the camera your adding each time

Turn on both camera and monitor. Bring the monitor close to the camera. Press menu button and scroll down to "add camera"
Press and hole the pairing button on the back of the camera and press and hold the centre button on the monitor and hold for a few seconds. The monitor should soon show what the camera sees. Then just close up menu.

I know I can easily go through and delete the bad ones once I view them on a larger screen or have had time to soak them in - but the fact is by the time I find time to do just that, I've already accumulated quite a few hundred photos and then its a daunting task.

i drop my cmera in water
its on and off but i cannot click to take picture why?

Your monitor has become unpaired with your camera. Follow the instructions in the manual to pair them again (basically, tell the monitor piece to Add New Camera while you press the Pair button on the camera). The manuals can be downloaded from www.summerinfant.com.

take the monitor to near the camera put the monitor to which camera say camera 1 and then on the camera there is a pairing button press it and thats it.