No picture, red light on side of tv blinks 5 times in a row

You need a service engineer

SOLVED: blinks the red light 10 times frequently - Sony Bravia ...

www.ifixit.com > Answers > View > blinks+the+red+lig...

Apr 24, 2018 - @hdcifix215 10 blinks apparently is not a real error code from Sony. The descriptor for that is "Watch Dog Timer used to track micro processors, ... 2 answers
red led blink 6 times when I turn on the tv - Sony ...
8 answers
Sep. 7, 2015
SOLVED: Blinking red light 5 times Sony Bravia 55" tv ...
5 answers
Apr. 8, 2017
SOLVED: red led blink 7 times - Sony KDF-E60A20 ...
1 answer
Apr. 21, 2020
bravia has no picture or sound and flashing 5 times ...
2 answers
May 10, 2018
More results from www.ifixit.com

5 blinks indicates a panel issue. check all cabling to panel, if OK, may be your panel, & replace TV

1. Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

sir
these are the causes for 5 red blink in your modal
Video OUT (IC1545) is
faulty. (A board)
• IC001 is faulty. (A board)
• Screen (G2) is improperly adjusted
thanks

5 times red standby light blinking shows problem with ballast supply board in Sony KDF-E50A10 model tv, ballast supply board provides high voltage to lamp to produce high bright light.
Please check/ replace ballast supply board in tv by local tv repairman.
Thanks.

turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672.

check the horizontal transistor

I get 5 blinking red lights for about a minute or so before it powers back down. The Sony TV has a specific light that i presume is supposed to light up when the bulb is out. I'm unsure if this is what it is.
no picture, no sound. tries to boot with green light blinking a few times. then goes to red blinking light, six in all, then waits a few moments, then another 6 blinking red light.
Bulb was already replaced several months ago but we do have the TV on for long periods of time.

i also have the same problem with the flashing green light for a while then a different red light starts blinking on and off around 5 times....and i replaced my burnt bulb with a new one...still no picture.