Panasonic Plasma TV Model# TH-42PD50U. the TV made a popping noise and after disconnecting the Power cord, the Red Light above the power Button is Blinking 2 times. TV will not come on
I have exact same problem....blinks twice...off for 2 or 3 seconds...blinks twice... nothing elseI have exact same problem....blinks twice...off for 2 or 3 seconds...blinks twice... nothing else
AnonymousMar 29, 2014
Hi. I have tv plasma th46pz85e blinking 2 redHi. I have tv plasma th46pz85e blinking 2 red
2 blinks means the unit is having problem with 12 volt supply.
while power on you can check 12DC on power supply before shutdown.if the voltage is constant before shut down I would recommend to replace D board.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The tv power supply board is the causes and the problems.That the board where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement.
The light blinking twice means there is a fault within the system and it is a code to tell Panasonic where roughly the fault lies. Go to Panasonic's web site and look for your set then input the fault code and hopefully they will tell you where the fault lies.
The power supply board is the cause,have tools like a soldering iron and solder?Know basic electronic and doing basic soldering?The power supply board,where the power a/c cord plug into.Check the power supply board for dying leakages capacitors parts,they'll alway bulges up on it tops or puffing up on it tops.These capacitors are dying and the cause.Replaced those capacitors,will solved this problems.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
Ur tv the power supply board,that the board where the power a/c cord plug into it,have dead parts call capacitors,these capacitors are dead,they useally bulges up it tops or puff up on it tops.U know basic electronic's and soldering.Replaced these dead capacitors,will get ur power stable again and tv will work.Or tries websites like Shopjimmy.com or Ebay.com to buy a whole refurbish power supply board for the replacement.
Does it start blinking as soon as you plug the tv in or only after you hit the power button? Also, how many times is it blinking? Count the number of blinks at least three times
Try to unplug and replug the power cord. If TV remains unchanged you need to call for service. The power supply board was defective. In worse case, the Y and buffers are defective, too. There are many steps needed to figure out the exact defective board. You need help from TV repairer unless you want DIY.
alletram sounds like a high voltage arc got your tv, it might just be a capacitor blown very inexpensive to fix. find some one that does component replacement.
I have exact same problem....blinks twice...off for 2 or 3 seconds...blinks twice... nothing else
Hi. I have tv plasma th46pz85e blinking 2 red
Can I get the pedestial stand for this TV model.TH-42PD50U
×