Hot tub keeps running all night keeping me awake. How do you shut it off? It's a Great Lakes.

Question 1

0helpful

2answers

Great lakes hot tub heater control not responding

Check the thermocouple on the water pipe.

Jul 16, 2022 • Pool & Spa

0answers

Hot feet keeping me awake at nights

Be the first to answer Aug 06, 2017 • Cars & Trucks

0helpful

1answer

No power, great lakes hot tub hear click like breaker tripping,down below in hot tub could it have bad internal fuses?

Charles, sorry I just re-read your question. The click you hear is likely a contactor if its an older model, and if it clicks its probably not the problem, just means its getting voltage. I would start by looking at the high limit switch. Look for a little reset button. A high limit switch trips when it senses high temperature, often from heater trying to run with Inadequate water flow.

Feb 22, 2017 • Pool & Spa

0helpful

1answer

My great lakes hot tub pump is on low speed and it will not shut off. I have it set to Ec mode.

One of two things either the thermostat is bad or the relay that controls the pump motor is stuck

May 27, 2016 • Pool & Spa

0helpful

2answers

Have a great Lakes hot tub GL8 it won't come on

check all fuses and breaker

Jul 09, 2015 • Pool & Spa

0answers

I just replaced my control panel on my great lakes hot tub and I seem to still not have power. The tub is empty currently. Do you have to have it filled in order for it to sense the water and cut on?

Be the first to answer Jun 05, 2014 • Qca Spas Dream Series Dream Master Hot Tub...

0helpful

1answer

Our fan keeps turning off in the middle of the night and then immediately back on. This process will repeat all night until you turn it off.

The fan might be set to something called "night mode" (which I have no idea why it's called that because it just keeps me awake). Try changing the mode that the fan is set to. Or, refer to the owners manual.

Jun 21, 2011 • Tower Tropical Breeze Nexus Fan

0answers

I have a great lakes hot tub. The control panel has the following buttons. jets.temp.light. The motor is pulsating. if I hold down the light switch the motor runs normal. I release it pulsates. Jet button...

Be the first to answer Apr 01, 2011 • Qca Spas Dream Series Dream Master Hot Tub...

0helpful

1answer

I have a 2004 great lakes hot tub with a balboa controler. My hot tub heats up fine when the pump runs on high but the temp light never comes on when the pump runs in low.

check to see that the flow switch is working properly, it may not have enough flow on low speed to allow the heater to turn on. Make sure your filter/s is/are clean. If you have a pressure switch instead of a flow switch, it may need to be adjusted or replaced.

Feb 04, 2010 • Qca Spas Jewel Series Topaz Plus Hot Tub

28helpful

2answers

Reset error code hot tub

tub is in sleep mode usually to change u must press temp button then light button you want to b on standard mode STD

Oct 04, 2009 • Qca Spas Dream Series Dream Master Hot Tub...

Question 2

Bath and Spa Parts Online

Expert 47 Answers
Posted on Sep 21, 2011

Bath and Spa Parts Online

Expert

Joined: Sep 09, 2011

Answers

47

Questions

0

Helped

21341

Points

132

If the system is the Jacuzzi 52221-05 system mentioned in the subject header, there could be a stuck relay causing the problem and you might need to get a spa technician out to assist you in repairing the problem. However...

If it is a Great Lakes system as mentioned in your message body, then there could be a programming issue allowing the filter cycle to run continuously. Provide a model number off of the Balboa control. Then we can provide you an instruction manual or reference card to assist you in resolving this problem. you can also search our online manuals at our website. You can find them online at:

BALBOA WATER GROUP INSTRUCTION MANUALS

Anonymous Aug 04, 2013

It is a Great Lakes Traverse Bay model. I replaced the heater (Balboa 58074) about 3 years ago. The heater has 1 sensor and 1 pressure switch which did not come with the heater, so they are original. Is this the pressure switch that will cause the "FL" code?

×

Related Topics:

Trustworthy Expert Solutions

Hot tub keeps running all night keeping me awake. How do you shut it off? It's a Great Lakes.

1 Answer

Bath and Spa Parts Online

Add Your Answer

Attachments: Added items

Related Questions:

Great lakes hot tub heater control not responding

Hot feet keeping me awake at nights

No power, great lakes hot tub hear click like breaker tripping,down below in hot tub could it have bad internal fuses?

My great lakes hot tub pump is on low speed and it will not shut off. I have it set to Ec mode.

Have a great Lakes hot tub GL8 it won't come on

I just replaced my control panel on my great lakes hot tub and I seem to still not have power. The tub is empty currently. Do you have to have it filled in order for it to sense the water and cut on?

Our fan keeps turning off in the middle of the night and then immediately back on. This process will repeat all night until you turn it off.

I have a great lakes hot tub. The control panel has the following buttons. jets.temp.light. The motor is pulsating. if I hold down the light switch the motor runs normal. I release it pulsates. Jet button...

I have a 2004 great lakes hot tub with a balboa controler. My hot tub heats up fine when the pump runs on high but the temp light never comes on when the pump runs in low.

Reset error code hot tub

Not finding what you are looking for?

Balboa R574 System for 1 2 Speed Pump Value 52221 05

Great lakes hot tub heater control not responding

Ask a Question

Top Jacuzzi Garden Experts

john h

Jay Finke

CJ Rock

Are you a Jacuzzi Garden Expert? Answer questions, earn points and help others

Manuals & User Guides

Manual. user-manual-Balboa R574 System...

Related Topics:

Trustworthy Expert Solutions

Hot tub keeps running all night keeping me awake. How do you shut it off? It's a Great Lakes.

1 Answer

Bath and Spa Parts Online

Add Your Answer

Attachments: Added items

Related Questions:

Great lakes hot tub heater control not responding

Hot feet keeping me awake at nights

No power, great lakes hot tub hear click like breaker tripping,down below in hot tub could it have bad internal fuses?

My great lakes hot tub pump is on low speed and it will not shut off. I have it set to Ec mode.

Have a great Lakes hot tub GL8 it won't come on

I just replaced my control panel on my great lakes hot tub and I seem to still not have power. The tub is empty currently. Do you have to have it filled in order for it to sense the water and cut on?

Our fan keeps turning off in the middle of the night and then immediately back on. This process will repeat all night until you turn it off.

I have a great lakes hot tub. The control panel has the following buttons. jets.temp.light. The motor is pulsating. if I hold down the light switch the motor runs normal. I release it pulsates. Jet button...

I have a 2004 great lakes hot tub with a balboa controler. My hot tub heats up fine when the pump runs on high but the temp light never comes on when the pump runs in low.

Reset error code hot tub

Not finding what you are looking for?

Balboa R574 System for 1 2 Speed Pump Value 52221 05

Great lakes hot tub heater control not responding

Related Topics

Ask a Question

Popular Questions

Hot tub stuck in 'SL' mode

How to Get Hot tub off sleep mode

Motor hums, but does not start..

I have a Balboa WH-R576-DCAH.

How to dismantle a jacuzzi magnum pool filter pump

Top Jacuzzi Garden Experts

john h

Jay Finke

CJ Rock

Are you a Jacuzzi Garden Expert? Answer questions, earn points and help others

Manuals & User Guides

Manual. user-manual-Balboa R574 System...