U don’t need to call no one or go to anyone to fix it u can do it by ur self
Only thing u need to do is to shake ur watch about 200 times and battery will come back and it will start working normal
Get that watch in ur hand buddy and just keep shaking for about 30 min and it will work perfectly fine
It is likely that the watch has simply run very low on power through not being worn at all. The movement will sleep if unused but does require wrist movement to recharge it eventually. It is also possible that the capacitor may need changing depending on its age but first try wearing it for a few weeks and you may find its absolutely fine once it has regained some charge. Yorkshire Watches.
SOURCE: I have not worn my SEIKO kinetic wrist watch for a
Here is the information from the website. The link to the manual is provided below. HOW TO CHARGE AND START THE WATCH Swing the watch from side to side approximately 50 times. * Before swinging the watch, check and remember where the minute hand is so that you can tell if the start-up indicator has worked or not. First, check that the crown is at the normal position. * If the crown is pulled out and the watch is swung, the start-up indicator will not work even if the watch starts operating. * Swing rhythmically at a rate of twice a second. * No additional benefit is obtained by swinging the watch more quickly or with greater vigor. * When the watch is swung, the oscillating weight in the generating system rotates to drive the mechanism. As it rotates, it gives out a sound, which is not a malfunction. 1 2 The minute hand moves quickly and stops as the watch starts operating. (Start-up indicator) Then, it will move at 20-second intervals. 3 After checking that the minute hand has done this, pull out the crown to set the time. 4 After pushing back the crown in to the normal position, swing the watch further approximately 350 times to reserve one day of power, and then, put the watch on your wrist. http://www.seikowatches.com/support/ib/pdf/1m20_e.pdf Good luck, Techjoel
SOURCE: watch will not stay running
Most likely time to replace the capacitor with a new Lithium Ion battery. This is the correct way to fix this problem. No one uses the old capacitors any more. I do this repair daily as a Certified Master Horologist/watch repair man. Ron at TimelyWatchRepair.com
SOURCE: How much is the capacitor problem in Seiko SNL001
Can be fixed in less than one week and cost is less than $80. See web site for Timelywatch repar.com. They guarantee their work. And yes, the old capacitors are only good for 3-4 years. All replacements are now with a much better, long lasting Lithium Ion battery.
SOURCE: SEIKO KINETIC SQ 50 HAVE USE MY WATCH FOR 14 YRS
It is unlikely that the capacitor will have any charge on it so you should shake it gently to charge it up. You certainly can't do any harm by charging it, even if the capacitor did have any charge.
1,075 views
Usually answered in minutes!
×