SkyScan 87801 how to reset time

Each time you press the set button on the back it selects one of the items that you can set. For example if the "month" is selected by pressing the "set" button then press the "+" key to change it from 1->2->3->4 etc. Each time you press "+" key the month will go up by one. Stop when you reach the correct month. You can do the same for each item including the time zone and daylight savings time and whether you want your temperature to be in Celcius or Farenheit. Hope this helps...

As suggested by ashwind in a previous article. Of course his fix was for a "SkyScan 86709 Atomic Wall Clock".. you didn't offer your model number.

go to clocks setup menu and turn off DST option

Follow instructions DST setiings (Daylight savings time)

how do I set the clock for PST?

I have a skyscan Atomic clock model no 86730 and can't set it, every time i get it set, it goes back 1 hr, i need to know to set it to daylight savings time

Most atomic clocks simply receive the National Institute of Standards and Technology (NIST) time signal. They do not all allow for daylight savings time changes as not all areas use it.

You will have to adjust manually.

how do I change my atomic clock to eastern time zone. Or when I set my time does it automatically set to the correct time zone.

This is a very common problem that is most frequently caused by the outdoor transmitter going bad. They are surprisingly delicate and don't like getting wet.

You can order replacement transmitters from http://skyscan.info/content/

They only cost $11 and that includes shipping and handling.

Press set button repeatedly -you get timezone mode and change your wished time zone and select your zone then press set button to normal mode and adjust the current time. kindly gave your rating after you read this.

check time zone setting