Recurrent error message 5C10. Significance? All printing stops when message appears.
Issue: ERROR LCD: Error code (5xxx through 9xxx) appears on the display
1. Press ON/OFF switch to reset the multifunction device 2. Press Stop/Reset and ON/OFF to reset the printer 3. The MP530 may require repair
else try
Had to move the printer cartridge and shut down three times, but itfinally kicked in and started working again. Don't give up just tryingit once.
else try
Move the cartridge holder back to the right manually, but carefully - close lid and turn the printer off, then on again.
HI,
1.Power off the printer
2, Unplug the printer's power cord, wait 5 seconds then replug the power cord in.
3, Hold the Power button for 6 Beeps
4, Release the Power Button
1. Press ON/OFF switch to reset the multifunction device
2. Press Stop/Reset and ON/OFF to reset the printer if it still continues then check the ink cartridges and clean the printer also checked the nozzles to be sure that they were clean and cleaned the area where the cartridges set
206 views
Usually answered in minutes!
When I held the power button on, it only beeped once despite holding it for as long as one minute. After printing a couple of documents, the error message 5C10 reappeared.
I have tried some solutions online and found this site,http://resetprinters.com/how-to-reset-ca... --it did work for me! :)
×