I can't fold my treadmill back up. Instead of folding upright at the 12 o'clock position it is tilted to the 11 o'clock position. Any ideas why it won't go all the way upright?

Have you tried using the strap at the back of the seat and using the black toggle to hold it into place. I am having a problem when the seat is upright position and you fold the pushchair the clips that hold the seat undo. The shop where I brought it from says you have to have the seat flat to fold the pushchair. But the seat string/toddle gets stuck. Anyone else having this problem?

dealers repair book best option/mechanics manuals may find online

I am having the exact same problem with my ProForm 615 treadmill. Spent over an hour trying to lower it.

Dear Sir:

Pleae read your instruction manual about how to fold your treadmill. If you do not have the instruction manual go: www.fitness.manualsonline.com and give your model and download for free.

Possible the pin is bent, you must need to rectify with a hammer with carefully. sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

1. Hold the upper end of the treadmill with your right hand
as shown. Using your left hand, pull the latch knob to the
left and hold it. Pivot the treadmill down until the frame is
past the latch pin. Slowly release the latch knob

I will strong that you see your owner manual. If you do not have manual.
here is the web page for you download free right now:

http://www.iconservice.com/CustomerService/manualsProductManuals.do?model=EPTL88105&modelName=EPIC+425+MX+

sincerely.Good luck.

http://www.youtube.com/watch?v=hHeYb6CoK4c please see the video for to see how to fold or unfold.

and then Read your user manual. if you do not have, please go to www. proform. com

then customer service and the section parts & manual, you give the model and serial and you download for free. Good Idea !

sincerely.

Dear Sir: Hello , i hope everythign is o.k
Please do the following:

FOLDING Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck to the upright position until the foot lock latch engages and securely locks the deck into position. Make sure the deck is securely latched before letting go. To unfold, firmly grasp the back end of the treadmill. Gently press down on the foot lock latch with your foot until the lock latch disengages. Carefully lower the deck to the ground. NOTE: on some models the foot lock latch might be on the right hand side. NOTE: when folding the Horizon Fitness Treadmill the console assembly will tilt away from you, but will return when fully folded in the upright position. Please allow two additional feet from wall when folding.
Thank you in advance, sincerely. Blessing.
If you need additional help, please contact me.
e.cuadra Managua, Nicaragua C.A.

Make sure the incline is at its lowest point 1. Hold the treadmill with your hands on each side of the frame at back of treadmill To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. 2. Move your right hand to hold the treadmill firmly in the upright position. Using your left hand, pull the latch knob to the left and hold it. Raise the treadmill until the latch pin is aligned with the hole in the catch. Insert the latch pin into the catch. Make sure that the latch pin is fully inserted into the catch.

When folding the Vibe some important things to remember are that the handlebar must be in the most upright position (perpendicular to the ground), nothing can be below the rear axle level (ie. lift the basket up above this) and the front single wheel should have the side with the attachment bar on the outside.
The fold locks will not engage if everything is not in the correct position. If everything is in the correct position the fold locks will easily engage/disengage. If everything is NOT in the correct position the fold locks will not engage and should not be forced.

Folding:

1. Put handle bar in upright position.


2. Undo the side lock clips. Then you lift the red lever on the side to start the fold. Fold so that the pram front wheel and handle come together.


3. As the pram folds ensure basket is above rear axle and the front wheel has the attachment bar on the outside.


4. When the pram is fully folded you can fold the side lock clips back in place.

I read on a tredmill troubleshooting website that if recalibrating and unplugging it doesnt wok it has something wrong electronicaly.