My tv you can hear it but not see the picure what should I do to fix it?

check that both tv and wii are on same Hz settings(50 or 60)

I believe that this is an LCD projection TV. I haven not worked on this model of set, therefore I will comment genericaly.

There is probably dust accumulation, or maybe a problem in the optical path, or a problem with the lamp. The set would have to be checked for this type of fault to begin with. There are other types of conditions that can cause what is known as shading problems, but are mor rare than what I descibed.

Jerry G.

call the guy

This is due to waer and tear meaning the caps in the tuner are waering out you may want to check the cable as well but its far more then that.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

This is a convergence problem that can be as simple as poor connections on the pins of the convergence ICs or defective ICs. If you can solder and are comfortable working inside the set where there are potentially dangerous high voltages even when unplugged, you can fix this yourself.

Let me know if you wish to attempt the repair and I will post additional details and instructions.

Dan

It's not the tuner, I suggest taking it in to a svc. co. to have it looked at. See if you can bring up the menu, if you can't that just reaffirms taking it to a service co.

For your Zenith P42W34D TV. The problem cause the a bad Y drive board. Replace the board will fix it.

Hope this will help.

you should take it to a tv repair shop to look it over, they charge $50 and they will tell you want the problem is.

CHECK FLYBACK TRANSFORMER LEADS FOR BAD SOLDER JOINTS, HAVE REPAIRED SEVERAL WITH SAME PROBLEM.