I have a Timex Indiglo digital watch. How do I shut off the hourly signal? Thanks.

hi Janet.
You may also need to change the time when traveling or to adjust for daylight saving time.

1. What to Look For. Locate the MODE button, the SET/INDIGLO button and the START/STOP button on the side of your Timex Indiglo WR 30M.
2. Setting the Hours. Press down the MODE button until "TIME" appears. ...
3. Setting Minutes and Date

https://oureverydaylife.com/how-do-i-change-the-time-on-a-timex-indiglo-wr-30m-12421830.html
How to set the time on timex WR30M watch Google Search

How to Set Dial Indiglo Watches

• 1Pinch the winding knob on the right side of the watch between your thumb and forefinger.



• 2 Pull the knob out from the watch slowly until it clicks into the first position.
  



• 3Turn the knob to move the hour and minute hand to set the time. Move the knob clockwise to move the settings forward and counterclockwise to move them backwards.



• 4 Pull the knob out further until it clicks into the second position. In the second position (the one furthest from the face), turn the knob to set the calendar, if your Indiglo has one. Turn the knob clockwise to move the settings forward and counterclockwise to move them backward. Push the knob back in to the watch face when you are done.
  

How to Set Digital Indigo Watches

• 1 Press the button on the lower right side of your Indiglo watch to unlock the mode function of the watch.
  
  



• 2 Press the button on the lower left side to move through the modes. Each time you are in a mode, the digital display will flash. For example, when the time display begins to flash, you are in the correct mode to set the time.
  
  



• 3 Change the time (or date) by pressing the button on the upper right side to advance the numbers or the button on the left side to move the numbers down. When you do this, you will be changing the first set of numbers (the hour or month, for instance); to change the minutes, press the button on the right side of the face until the second set of numbers is flashing and begin the process again.
  
  



• 4 Press the button on the lower left side of the watch to save your settings. The button on the upper left side of the watch is not used in this process--it is the switch to turn on your Indiglo light.
  

Read more : http://www.ehow.com/how_5758168_set-timex-indiglo.html

It's a Timex watch type "W-6". There's an online manual for it here:http://www.manualsonline.com/manuals/mfg/timex/w6.html

If you are asking Timex for a replacement, you should not attempt any repairs yourself, as this may invalidate your warranty!

There are two ways to find the user manual for your Timex watch.

1. Find your watch on the list below and click on the language link for your manual.
   
   
2. Find the 3-digit module number located on the caseback of most Timex products and click on the corresponding language link for that number in the Module Table.

If you are still unable to locate your user manual, you may emailTimex Customer Service or call us toll-free at 1-800-448-4639.

http://www.timex.com/info/Product_Instruction_Guides_Downloads

You can get instructions from the Timex web site "timex.com".

At the bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

1-Place watch on hard flat surface.
2-Hit repeatedly with large hammer.
If you should need further assistance just ask.

You may find a solution here:
http://assets.timex.com/manuals/?timexBrand=core


Rate me, please.

The indiglo technology is time limited (it dims over the years with use) and cannot be repaired - have you had the watch a long time? if so, I'm afraid it's time to get a new one. Sorry!

While the time is displaying on watch press & hold the set/indiglo or top left button on watch. The seconds should start to flash.

Press the mode or bottom left button until the hour digits start to flash.

Press top right or start/stop button to advance the hour. Then press top left or set/indiglo button to exit set mode.