Lost my manual and need to know how to thread the machine

Go to www.singerco.com and download your manual for free. Just go under customer support and put 1120 in the box. good luck

Try on this site.
http://www.sewingonline.co.uk/instructions/
Some manuals are free to view online and reasonably priced to download.

manuals can be purchased @ janome. com. your machine should have a bobbin winder. Set empty bobbin on the bobbin winder pin. Thread spool of thread though guide(or tension wheel on the top of the machine;NOT the stitching tension.) wrap thread around bobbin to start, and push bobbin toward the flywheel. slowly press foot pedal and bobbin should begin to turn. apply more pressure to foot pedal to increase speed.When full, bobbin winder should kick back to stop.

http://www.mastersewusa.com/ or try:

http://www.sewusa.com/Sewing_Machine_Threading_Diagrams.htm

The threading instructions are free if they have your machine...if you want a guide book for using the machine or servicing it, then there is a cost to receiving that information.

i need information on threading a 920D brothers serger, on paper so i can take it to my machine to thread

Here is a diagram:

http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Brother_Sewing_Machine_Threading/brother_LS_1217_threading_diagram.htm

here is the brother site and downloadable manual is available for the LS-1217

http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/model_top/HomeSewingMachine/hf_ls1217eus.html?reg=us&c=us_ot&lang=en&prod=hf_ls1217eus

I hope this helped!

Place thread spool on the spool pin at back right top of machine. From there, thread through 1) rear thread guide (little hook), 2) front thread guide (front hook), 3) down and up through the thread tension dial from right to left so that thread picks up the thread spring check (the little spring on the left of the tension dial). 4) Through the thread take-up-lever, from right to left (the little lever that goes up and down). 5) Through the thread guard and guides (one on the front, one on the needle arm). 6) Through the needle, front to back. Good luck johntrev800 (at) yahoo.com

http://www.singerco.com/resources/threading.html

You can download the manual from the link below: http://www.simplicityhomecare.com/manuals/ There is a quick start guide & full manual. Please update the question & let us know if the information given was useful to you - Good Luck!