I have the camera but don't know how to install it...what do I need to do? I think it is the ice2 model.

I would have a apliance guy come check it out, if its an old fridge it probly needs to be recharged with freeon or r12 but r12 is illegal to use withought liscence and they dont use r12 in new fridges anymore. Good luck.

I am afraid if your camera is asking to download codec, but I don't think so. I guess it's about your computer. If it's Windows Computer, you can use KliteMegaCodecPack.. You can download it from here..
Good luck..
Let me know if you need further help..

I think this is a Q-tec 100 webcam ..and it should install by itself in windows 7 and vista ..Im not sure about windows xp ..and here is a driver to run it on xp if it is the case..If it is not running on windows 7 ..and you need the driver ..download this one ..and select on its properties to run in compatibility with windows xp ..and will work .
http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/OTHER-SCANNERS/Q-Tec-Webcam-100-USB-Driver-10.shtml
let me know what you've managed to do ..

just down load it
and then you click on the downloaded file and it should install the software.
the link below will automatically detect the windows operating system you are using if you are using windows
https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/support-point-and-shoot/powershot-sd-elph-series/powershot-sd850-is?tab=drivers_downloads

Don't thank us yet!....So far we know it's ***********'s camera, *********** is elderly, you must be very nice to be helping her out this way, you can't find the charger, the batteries are ok but need charged. What don't we know?...what is the make and model of the camera?

If your camera is less than a year old, call Samsung for a warranty repair. If the camera is more than a year old you will need to replace the lens mechanism.

Some may tell you to blow compressed air into the camera or bang it on a table; these things will either do nothing or damage your camera even more.

Don't know your camera model, so I don't know if we can help with the repair as we aren't able to get every lens for every camera.

Thomas Drayton
Owner, Darntoothysam.com Digital Camera Repair

Digital cameras that come with internal memory usually have a very small amount of storage capacity (usually 32 or 64MB). I'm not sure why the manufacturers even bother with internal storage when you can get memory cards that have much more capacity. You need to either download the photos you've taken to your PC and then delete the photos so you can take more shots, or you need to insert a memory card. Depending on your model of camera you need a microSD or SD card. Let me know the model number of the camera and I will tell you what you need to get.

Hope this helps!

Tom

You don't say what brand or model camera, so I can't be more specific. Go to the manufacturer's website. Go to Support, or Support & Downloads. Search for your model on cam, and download the software/drivers.

Good luck. Let me know if you need more help.

Time to install another alarm system.Go to the power source just disconnect the battery power source,if the control panel don't acept the codes or respone to the codes anymore.If the alarm keep going off the police come out more than one,they'll give a ticket every other times they have to show up to check around.

You don't state the brand and model of your web camera, so I can't give you specifics -- only general instructions. If you have the product manual, look for the manuafacturer's website.

• Use www.Google.com or other search engine to locate the website of the manufacturer of your web camera.
• Once you are at their website, look for support for your particular product by name and model number - OR -
• Some sites will have a general section offering technical help for all their products. It may be labeled with words such as "product" or "technical" and the words "support", "help" or "assistance". Then you locate your specific product.
• Once you find this area of the website, look for "installation" information or "downloads". You should be able to find the installation file(s) you need.
• Follow the instructions on the website to download and install the software for your web camera.

Good luck.