Hands on watch do not move but the seconds digital part still works. It is a fossil watch JR 8623.

How many do you want?

https://www.google.com/search?q=Fossil+JR-9525

..

Will cost more to change the movement than its worth.....lose it.

Inside the case back on my JR-7855 is a label with the steps to take to change the batteries. The sticker says to short the pad marked "S1" with the pad marked "+". Keep doing it quickly, then check the watch face. You got it right when the seconds start to change on the face.



Here is a view at the inside of the watch. The two points you are looking for are highlighted in red.


Ads by Google

Use tweesters to touch both "+" and "s2" point can change that.

Inside the case back on my JR-7855 is a label with the steps to take to change the batteries. The sticker says to short the pad marked "S1" with the pad marked "+". Keep doing it quickly, then check the watch face. You got it right when the seconds start to change on the face.



Here is a view at the inside of the watch. The two points you are looking for are highlighted in red.

This watch has 2 batteries so sounds like the main one has gone flat and the display one is still going, you just need to get the battery replaced.

this happens a lot the watch you have has to separate batteries both batteries were probably old. they tried replacing both but the movement on the analog part is probably corroded or rusty.

Sometimes these watches have 2 batteries. One for the digital & one for the hands.

Hello,
i already found one link with all Fossil manuals.
Thank´s for your support.

The watch is scrolling through the seconds, and is not something that needs to be set. If there is a bottom it is only there to change the way the seconds are scrolling? There are many different types of these, but most are just standard seconds.