I am using a gigaset 504 router at home. i could configure my lap top as well as iphone and ipad without any problem, but recently i tried to configure a wireless IFIT module used on treadmill with my router but it fails with msg ''DHCP server not found ''. router DHCP is enabled.

Its means that 11 people are using you're router. I would turn on WPA or WPA2 security on the router, and put a password on it, then use whats called MAC address filtering so it only allows you internet access. Also disable WPS if you can because it can be hacked easily.

Connect the ISP modem to main uplink port. Then connect pc to any other port. Done!

Search siemens gigaset 504

They have very easy setup instructions
http://etisalatsupport.blogspot.com/2012/07/siemens-gigaset-504-router.html


Save file for next time.
http://www.etisalat.ae/eportal/en/images/docs/userguides/modem&drivers/Setup-ADSL-Siemens504AGU.pdf

Can you verify if your router is broadcasting using N only? Make sure it broadcasts in mixed B/G/N since some technologies may have problems with regards to the draft N standard.
Here is a link to enlighten you about B/G/N: http://www.achive.info/how-to-hack-psp-vita-jailbreak/

How to change my Gigaset 504 Agu wirless password

check with internet service provider support
as the router will need to be set up with log in details for the isp.
They should be able to guide you through setting up your router.

i think it will helpful
http://gigaset.com/hq/en/cms/PageCustomerServicesDownloadsManuals.html

Gigaset 504 AGU black color signal antenna . How to find (Host Name) and only showing there mac address ans ip address. i want see witch one using my net and we want fine friend computer name in my router .

You need to made it to default factory reset by pressing a few seconds on the reset button in the bottom of the devices. When it restarts it will be looks as new and you should re configure the isp settings of your internet connection. That's all. Before you make reset, don't forget to save the configuration to your computer for the future. Because if it is not working when you made the reconfiguration, you can also install the configuration from this configuration file.

ican password change and wirless signal on

loptop not connect to router as wireless