All works fine, except machine will not fast spin. All other cycles (gentle agitate, fill, drain, timer advance) are fine. Wondering how to test the motor. I'm very handy so don't be shy with the directs. Last desired path is calling repair center. Thank you!
If this is a 417 model your problem might be the pump itself. There is a pressure switch that detects whether or not there is any water left in the tub. If so, it will not go into high spin. Remove the lower panel and check the pump on the lower right side. See if there is any gunk or coins in there by removing the hoses attached to it. Have a flat pan or a bunch of towells ready to catch the remaining water from the tub. If the pump checks ok, the next move would be to check the motor controller itself.
171 views
Usually answered in minutes!
×