My sanyo tv doesnt have the remote and i need t adjust the screen so that i can see the whole picture

use the menu button on the side of the tv
that brings up the screen menu
using the channel and volume buttons move around until you find aspect ratio
find the one that fits the screen and press the menu button to save and exit
it could be a pixel setting so find pixel settings while the menu is on the scree and adjust to the correct pixel setting
there are plenty of remotes for tv units on e-bay
all you have to do is select one that is for sanyo led/lcd tv's and read the details to see it it works your model tv

Try getting an original remote here:
TV Parts Universal TV Stands DLP Chips ShopJimmy

no, but have the buttons in question tested with a remote tester, may have had a liquid spilled on the remote and two buttons next to each other are affected, if not the remote it is serious.

No,13060 resolutions will not support by some tv correctly,will shift whole picture about to 6 inches to the right.That why,must use the PC Control panel to adjust to 1024 for the video to center.For the wide aspect 16:9 ratio,just find another aspect ratio to for expandsion to fit the entire screen.

Hello; You need to select the best " aspect ratio or other name on the Sanyo remote" Read your Sanyo owner's manual or download it for more Info. John

Get into setup for zoom function. Or, like my remote, the zoom fuction is right at the bottom with no menu to go to.

try to fine tune your tv using the remote control, or, if you had knowleged in electronics adjust the sound IF transformer using a wood stick or plastic don't use a metal in adjusting the IF

intermintence in vertical IC deflection its a job for experienced tech need to look for that circuit and do fine job resolding that IC